學術產出-學位論文

文章檢視/開啟

書目匯出

Google ScholarTM

政大圖書館

引文資訊

TAIR相關學術產出

題名 二階段調整雙週期交叉設計實驗之生物對等性檢定之研究
A Simulation Study of Bioequivalence Test in a Two-stage Cross-over Adaptive Design
作者 黃意珺
Huang, Yi-Chun
貢獻者 薛慧敏
Hsueh, Huey-Ming
黃意珺
Huang, Yi-Chun
關鍵詞 二階段調整設計
2X2交叉設計
生物對等性檢定
型一誤差率
檢定力
第一階試驗段終止率
連續型資料
二元資料
Binary data
bioequivalence test
continuous data
power
2X2 cross-over design
two-stage adaptive design
type one error rate
日期 2019
上傳時間 7-八月-2019 16:02:04 (UTC+8)
摘要 雙週期調整實驗的目的為提升藥物研發之效率。透過這樣的設計,能使得實驗有機會獲得統計結論提早結束,或者是調整樣本數,得到更適切的結果。為了降低資料變異,每一階段或週期採用交叉實驗。本研究討論雙週期交叉調整設計之生物對等性檢定,我們考慮以雙單尾t檢定(Two one-sided t-tests,簡稱TOST)(Phillips, 1990)來檢定受試者服用兩藥品之血漿濃度之平均水準之對等性。有別於Maurer等人(2018)(Maurer, Jones, & Chen, 2018)考慮二變量非中心化t分佈(Bivariate non-central t-distribution)直接積分以計算檢定力,本篇論文使用電腦模擬常態母體受試者資料以決定生物對等性檢定之檢定力及樣本數。我們透過模擬來研究此雙週期調整實驗之統計性質。我們發現其型一誤差率大多控制在可接受範圍內,但所計算出樣本數過大而導致檢定力高於所要求之水準,具有改善空間。另外,若受試者資料為二元型態,例如受試者服藥後之正面反應與否等,我們研究上述雙週期調整實驗與雙單尾t檢定之適當性。我們使用電腦來模擬伯努力受試者資料以決定該生物對等性檢定之檢定力。最終,模擬實驗的結果顯示在某些情況下,該試驗之型一誤差率稍微膨脹或者檢定力未達要求,而且實驗在第一階段終止率亦不如連續型資料。
The two-stage adaptive design is developed to increase the efficiency of clinical trials during drug development. Not only that we may obtain a statistical conclusion in the interim analysis and have an early stop of the trial at the first stage, but also that we can have a more adequate sample size re-estimation for the second stage of the experiment. On the other hand, to minimize the data variation, we consider the crossover design of two periods and two sequences in every stage. This research mainly focuses on testing the bioequivalence of a test generic drug to a reference brand-name drug. We consider the two one-sided t-tests (TOST) (Phillips, 1990) to compare the means of the maximum plasma concentration of a patients taking the two different drugs. Instead of integrating a bivariate non-central t-distribution for power calculation (Maurer et al., 2018), we use an R-package to simulate sample data from normal population distributions to calculate the power of the TOST in a cross-over design. The sample size can be determined subsequently. Through a simulation study, we find that the type one error rate of the TOST in the adaptive cross-over design is acceptable mostly. However, the power of the test noticeably exceeds the required level, the sample size estimation tends toward conservatism. Hence, there is a room of improvement for this adaptive design. Besides the data of a continuous end-point, we also investigate the applicability of the TOST in an adaptive cross-over design with the data of a binary end-point. Similarly, we simulate numerous samples of data from Bernoulli population distributions to evaluate the power of the TOST. According to an intensive simulation study, we find that the application of such design with respect to binary data may produce an inflated type I error rate and an insufficient power. Furthermore, the first-stage-stopping-rate is not good as the data of continuous end-point.
參考文獻 吳雅琪. (2011). 臨床試驗樣本數計算簡介. 當代醫藥法規月刊 RegMed, 5.
Chuang-Stein, C., & Beltangady, M. (2010). FDA draft guidance on adaptive design clinical trials: Pfizer`s perspective. Journal of biopharmaceutical statistics, 20(6), 1143-1149.
Food and Drug Administration, Center for Drug Evaluation and Research(CDER) (2018a). Guidance for Industry : Adaptive Designs for Clinical Trials of Drugs and Biologics.
Food and Drug Administration, Center for Drug Evaluation and Research(CDER) (2018b). Guidance for Industry : Bioanalytical Method Validation
Kieser, M., & Rauch, G. (2015). Two‐stage designs for cross‐over bioequivalence trials. Statistics in medicine, 34(16), 2403-2416.
Labes, D., Schuetz, H., & Lange, B. (2018). Package ‚PowerTOST‘.
Maurer, W., Jones, B., & Chen, Y. (2018). Controlling the type I error rate in two-stage sequential adaptive designs when testing for average bioequivalence. Statistics in medicine, 37(10), 1587.
Midha, K. K., & McKay, G. (2009). Bioequivalence; Its History, Practice, and Future. The AAPS Journal, 11(4), 664.
Phillips, K. F. (1990). Power of the two one-sided tests procedure in bioequivalence. Journal of pharmacokinetics and biopharmaceutics, 18(2), 137-144.
Pocock, S. J. (1977). Group sequential methods in the design and analysis of clinical trials. 64(2), 191-199.
Potvin, D., DiLiberti, C. E., Hauck, W. W., Parr, A. F., Schuirmann, D. J., & Smith, R. A. (2008). Sequential design approaches for bioequivalence studies with crossover designs. Pharm Stat, 7(4), 245-262. doi:10.1002/pst.294
Rosner, B. (2015). Fundamentals of Biostatistics 8th Edition.
描述 碩士
國立政治大學
統計學系
106354019
資料來源 http://thesis.lib.nccu.edu.tw/record/#G0106354019
資料類型 thesis
dc.contributor.advisor 薛慧敏zh_TW
dc.contributor.advisor Hsueh, Huey-Mingen_US
dc.contributor.author (作者) 黃意珺zh_TW
dc.contributor.author (作者) Huang, Yi-Chunen_US
dc.creator (作者) 黃意珺zh_TW
dc.creator (作者) Huang, Yi-Chunen_US
dc.date (日期) 2019en_US
dc.date.accessioned 7-八月-2019 16:02:04 (UTC+8)-
dc.date.available 7-八月-2019 16:02:04 (UTC+8)-
dc.date.issued (上傳時間) 7-八月-2019 16:02:04 (UTC+8)-
dc.identifier (其他 識別碼) G0106354019en_US
dc.identifier.uri (URI) http://nccur.lib.nccu.edu.tw/handle/140.119/124686-
dc.description (描述) 碩士zh_TW
dc.description (描述) 國立政治大學zh_TW
dc.description (描述) 統計學系zh_TW
dc.description (描述) 106354019zh_TW
dc.description.abstract (摘要) 雙週期調整實驗的目的為提升藥物研發之效率。透過這樣的設計,能使得實驗有機會獲得統計結論提早結束,或者是調整樣本數,得到更適切的結果。為了降低資料變異,每一階段或週期採用交叉實驗。本研究討論雙週期交叉調整設計之生物對等性檢定,我們考慮以雙單尾t檢定(Two one-sided t-tests,簡稱TOST)(Phillips, 1990)來檢定受試者服用兩藥品之血漿濃度之平均水準之對等性。有別於Maurer等人(2018)(Maurer, Jones, & Chen, 2018)考慮二變量非中心化t分佈(Bivariate non-central t-distribution)直接積分以計算檢定力,本篇論文使用電腦模擬常態母體受試者資料以決定生物對等性檢定之檢定力及樣本數。我們透過模擬來研究此雙週期調整實驗之統計性質。我們發現其型一誤差率大多控制在可接受範圍內,但所計算出樣本數過大而導致檢定力高於所要求之水準,具有改善空間。另外,若受試者資料為二元型態,例如受試者服藥後之正面反應與否等,我們研究上述雙週期調整實驗與雙單尾t檢定之適當性。我們使用電腦來模擬伯努力受試者資料以決定該生物對等性檢定之檢定力。最終,模擬實驗的結果顯示在某些情況下,該試驗之型一誤差率稍微膨脹或者檢定力未達要求,而且實驗在第一階段終止率亦不如連續型資料。zh_TW
dc.description.abstract (摘要) The two-stage adaptive design is developed to increase the efficiency of clinical trials during drug development. Not only that we may obtain a statistical conclusion in the interim analysis and have an early stop of the trial at the first stage, but also that we can have a more adequate sample size re-estimation for the second stage of the experiment. On the other hand, to minimize the data variation, we consider the crossover design of two periods and two sequences in every stage. This research mainly focuses on testing the bioequivalence of a test generic drug to a reference brand-name drug. We consider the two one-sided t-tests (TOST) (Phillips, 1990) to compare the means of the maximum plasma concentration of a patients taking the two different drugs. Instead of integrating a bivariate non-central t-distribution for power calculation (Maurer et al., 2018), we use an R-package to simulate sample data from normal population distributions to calculate the power of the TOST in a cross-over design. The sample size can be determined subsequently. Through a simulation study, we find that the type one error rate of the TOST in the adaptive cross-over design is acceptable mostly. However, the power of the test noticeably exceeds the required level, the sample size estimation tends toward conservatism. Hence, there is a room of improvement for this adaptive design. Besides the data of a continuous end-point, we also investigate the applicability of the TOST in an adaptive cross-over design with the data of a binary end-point. Similarly, we simulate numerous samples of data from Bernoulli population distributions to evaluate the power of the TOST. According to an intensive simulation study, we find that the application of such design with respect to binary data may produce an inflated type I error rate and an insufficient power. Furthermore, the first-stage-stopping-rate is not good as the data of continuous end-point.en_US
dc.description.tableofcontents 第一章、介紹 1
第二章、方法 4
第一節 連續型態 4
第二節 二元型態 12
第三章、模擬實驗 20
第一節 連續型態資料 20
第二節 二元型態資料 27
第四章、結論 33
參考文獻 35
zh_TW
dc.format.extent 1010538 bytes-
dc.format.mimetype application/pdf-
dc.source.uri (資料來源) http://thesis.lib.nccu.edu.tw/record/#G0106354019en_US
dc.subject (關鍵詞) 二階段調整設計zh_TW
dc.subject (關鍵詞) 2X2交叉設計zh_TW
dc.subject (關鍵詞) 生物對等性檢定zh_TW
dc.subject (關鍵詞) 型一誤差率zh_TW
dc.subject (關鍵詞) 檢定力zh_TW
dc.subject (關鍵詞) 第一階試驗段終止率zh_TW
dc.subject (關鍵詞) 連續型資料zh_TW
dc.subject (關鍵詞) 二元資料zh_TW
dc.subject (關鍵詞) Binary dataen_US
dc.subject (關鍵詞) bioequivalence testen_US
dc.subject (關鍵詞) continuous dataen_US
dc.subject (關鍵詞) poweren_US
dc.subject (關鍵詞) 2X2 cross-over designen_US
dc.subject (關鍵詞) two-stage adaptive designen_US
dc.subject (關鍵詞) type one error rateen_US
dc.title (題名) 二階段調整雙週期交叉設計實驗之生物對等性檢定之研究zh_TW
dc.title (題名) A Simulation Study of Bioequivalence Test in a Two-stage Cross-over Adaptive Designen_US
dc.type (資料類型) thesisen_US
dc.relation.reference (參考文獻) 吳雅琪. (2011). 臨床試驗樣本數計算簡介. 當代醫藥法規月刊 RegMed, 5.
Chuang-Stein, C., & Beltangady, M. (2010). FDA draft guidance on adaptive design clinical trials: Pfizer`s perspective. Journal of biopharmaceutical statistics, 20(6), 1143-1149.
Food and Drug Administration, Center for Drug Evaluation and Research(CDER) (2018a). Guidance for Industry : Adaptive Designs for Clinical Trials of Drugs and Biologics.
Food and Drug Administration, Center for Drug Evaluation and Research(CDER) (2018b). Guidance for Industry : Bioanalytical Method Validation
Kieser, M., & Rauch, G. (2015). Two‐stage designs for cross‐over bioequivalence trials. Statistics in medicine, 34(16), 2403-2416.
Labes, D., Schuetz, H., & Lange, B. (2018). Package ‚PowerTOST‘.
Maurer, W., Jones, B., & Chen, Y. (2018). Controlling the type I error rate in two-stage sequential adaptive designs when testing for average bioequivalence. Statistics in medicine, 37(10), 1587.
Midha, K. K., & McKay, G. (2009). Bioequivalence; Its History, Practice, and Future. The AAPS Journal, 11(4), 664.
Phillips, K. F. (1990). Power of the two one-sided tests procedure in bioequivalence. Journal of pharmacokinetics and biopharmaceutics, 18(2), 137-144.
Pocock, S. J. (1977). Group sequential methods in the design and analysis of clinical trials. 64(2), 191-199.
Potvin, D., DiLiberti, C. E., Hauck, W. W., Parr, A. F., Schuirmann, D. J., & Smith, R. A. (2008). Sequential design approaches for bioequivalence studies with crossover designs. Pharm Stat, 7(4), 245-262. doi:10.1002/pst.294
Rosner, B. (2015). Fundamentals of Biostatistics 8th Edition.
zh_TW
dc.identifier.doi (DOI) 10.6814/NCCU201900537en_US