| dc.contributor.advisor | 吳安妮 | zh_TW |
| dc.contributor.author (作者) | 尤隨樺 | zh_TW |
| dc.creator (作者) | 尤隨樺 | zh_TW |
| dc.date (日期) | 2002 | en_US |
| dc.date.accessioned | 18-九月-2009 09:13:32 (UTC+8) | - |
| dc.date.available | 18-九月-2009 09:13:32 (UTC+8) | - |
| dc.date.issued (上傳時間) | 18-九月-2009 09:13:32 (UTC+8) | - |
| dc.identifier (其他 識別碼) | G91NCCU0222012 | en_US |
| dc.identifier.uri (URI) | https://nccur.lib.nccu.edu.tw/handle/140.119/34281 | - |
| dc.description (描述) | 博士 | zh_TW |
| dc.description (描述) | 國立政治大學 | zh_TW |
| dc.description (描述) | 會計研究所 | zh_TW |
| dc.description (描述) | 86353504 | zh_TW |
| dc.description (描述) | 91 | zh_TW |
| dc.description.abstract (摘要) | 本論文採用實地實證研究，以一家專業晶圓代工廠商為研究對象，詳細分析在晶圓代工的製造環境下，產品多樣性及製造彈性對生產品質、生產週期時間、設備生產力與生產成本之影響。不同於過去研究，以外部彈性(例如：產品組合彈性、新產品彈性等)為研究重心，本論文以內部彈性為研究範疇，涵蓋機器彈性與路徑彈性兩種彈性型態，據以彌補現存製造彈性文獻的缺口。關於產品多樣性與製造彈性對生產績效與生產成本之直接影響，本論文首先以等候理論與整數規劃模型為基礎，加入實地環境特性的考量，推導研究假說與實證模型；繼而，蒐集來自個案公司6個月的詳細生產資料，包括兩類資料型態：機台水準(machine-level)與生產批量水準(lot-level)進行實證分析。綜合理論模型與實證分析結果，本論文發現：在晶圓代工的製造環境中，由於製程高度自動化之故，產品多樣性對生產績效的直接影響並不顯著，但因研發與工程實驗所產生的環境變異性則對生產績效具有顯著的負面影響；在製造彈性方面，吾人則發現路徑彈性不僅有助於生產週期時間的縮短，也對品質與成本績效具有顯著的正向影響，而機器彈性雖有助於設備生產力的提昇與生產成本的降低，但對生產品質則有顯著的負面影響，此外，本研究也發現：製造彈性與設備生產力、生產週期時間及生產成本之間存在非線性關係，並呈現報酬遞減的趨勢，隱含：極大化製造彈性並非最佳，有限的彈性水準即可達到最大的彈性利益。考慮製造彈性的價值高低與環境不確定性密切相關，本研究進一步採用路徑分析檢視產品多樣性、製造彈性、環境不確定性與生產績效之間的關聯性，基於本研究以內部彈性為研究範疇，並以製造環境為研究客體，依據生產管理文獻，由製程時間變異性、到達時間變異性及產品需求變異性三項指標定義製造環境的不確定性。實證結果顯示：產品多樣性主要係透過環境不確定性間接影響生產績效，而機器彈性與路徑彈性則有助於調和內部不確定性對生產績效的負面影響，進而達成生產績效的提昇。本論文之分析結果隱含：過去管理會計研究認為產品多樣性對生產績效的影響主要來自於批量作業活動(batch-level activities)與產品支援活動(product-sustaining activities)的增加，而忽略產品多樣性對環境不確定性的影響，可能低估產品多樣性的攸關成本，尤其在一高利用率與高度動態的生產環境中，產品多樣性透過環境不確定性對生產績效的間接影響可能大於產品多樣性對生產績效的直接影響；另一方面，本研究指出：在一動態環境中，廠商可透過製造彈性的提昇，降低環境不確定性對生產績效的負面影響，但最適彈性水準的決定則須取決於製造彈性與其他生產績效衡量之間的函數關係。 | zh_TW |
| dc.description.abstract (摘要) | This thesis reports the results of a field empirical study examining the impact of product variety and manufacturing flexibility on production quality, cycle time, equipment productivity, and production cost within the context of semiconductor wafer fabrication facilities. To fill the gap in existing research, I attempt to study internal flexibility, rather than external flexibility (e.g., product flexibility, mix flexibility). Two types of internal flexibility are selected, which are machine flexibility and routing flexibility. Using both machine-level and lot-level production data from one dedicated wafer fabrication plant, this thesis examines the direct impact of product variety and manufacturing flexibility on production performance and production cost. Empirical results suggest that greater product variety does not have a significant impact on equipment productivity but does have a significant adverse impact on production quality. Moreover, I find support for the hypotheses that greater routing flexibility has a significant positive impact on quality, time, and cost performance. As for machine flexibility, it has a significant positive impact on equipment productivity and cost performance, but has a significant negative impact on production quality. Furthermore, I also find a non-linear relation between manufacturing flexibility and equipment productivity, cycle time, and production cost. This implies that maximizing the level of manufacturing flexibility is not necessarily optimal for firms. Limiting the flexibility level may actually have the greatest benefit. To further clarify the mechanisms through which variety and flexibility impacts performance, I move beyond the direct effects and investigate the linkage between product variety, manufacturing flexibility, environmental uncertainty and production performance. Based on the operations research, environmental uncertainty is operationally defined as the process time variation, inter-arrival time variation, and output variation. Results from path analysis indicate that product variety negatively affects production performance through environmental uncertainty. This finding stands in direct contrast to the general belief in management accounting research that greater product variety leads to an increase in the number of batch-level activities and product-sustaining activities, which thus increase the production cost. In other words, the reported cost of product variety may be underestimated, because we do not consider the impact of product variety on environmental uncertainty. The magnitude of the underestimation is especially greater in a highly congested and stochastic environment. Empirical results also show that machine flexibility and routing flexibility mitigate the adverse impact of environmental uncertainty on production performance. | en_US |
| dc.description.tableofcontents | 論文摘要 iii圖次 viii表次 ix第一章 緒論 第一節 研究背景與動機 1第二節 研究目的與研究問題 3第三節 研究貢獻 6第四節 論文架構 8第二章 文獻探討第一節 產品多樣性之相關文獻 10第二節 製造彈性之相關文獻 22第三節 製造彈性、環境不確定性與生產績效之關係 41第四節 研究延伸 43第三章 半導體產業及個案公司探討第一節 半導體產業概況 49第二節 個案公司之介紹 51第四章 理論基礎與假說發展第一節 產品多樣性對生產績效之影響 56第二節 路徑彈性對生產績效與生產成本之影響 61第三節 機器彈性對生產績效與生產成本之影響 65第五章 實證模型之發展第一節 產品多樣性對生產績效之影響 71第二節 製造彈性對生產績效之影響 81第三節 製造彈性對生產成本之影響 87第六章 研究方法第一節 觀念性架構 92第二節 研究設計 96第三節 研究期間、樣本選取與資料蒐集 97第四節 資料分析方法 98第七章 實證結果分析 第一節 產品多樣性對生產績效之影響 101第二節 製造彈性對生產績效之影響 112第三節 製造彈性對生產成本之影響 123第四節 產品多樣性與製造彈性對環境不確定性與生產績效之影響 136第五節 敏感度分析 142第八章 結論、研究限制與建議 第一節 研究結論 148第二節 研究限制 154第三節 建議與未來研究方向 155參考文獻 157 | zh_TW |
| dc.format.extent | 49873 bytes | - |
| dc.format.extent | 125891 bytes | - |
| dc.format.extent | 131887 bytes | - |
| dc.format.extent | 152487 bytes | - |
| dc.format.extent | 168112 bytes | - |
| dc.format.extent | 311486 bytes | - |
| dc.format.extent | 240683 bytes | - |
| dc.format.extent | 325916 bytes | - |
| dc.format.extent | 400460 bytes | - |
| dc.format.extent | 194473 bytes | - |
| dc.format.extent | 275615 bytes | - |
| dc.format.extent | 162695 bytes | - |
| dc.format.extent | 156046 bytes | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.format.mimetype | application/pdf | - |
| dc.language.iso | en_US | - |
| dc.source.uri (資料來源) | http://thesis.lib.nccu.edu.tw/record/#G91NCCU0222012 | en_US |
| dc.subject (關鍵詞) | 產品多樣性 | zh_TW |
| dc.subject (關鍵詞) | 路徑彈性 | zh_TW |
| dc.subject (關鍵詞) | 機器彈性 | zh_TW |
| dc.subject (關鍵詞) | 環境不確定性 | zh_TW |
| dc.subject (關鍵詞) | 晶圓代工 | zh_TW |
| dc.subject (關鍵詞) | Product variety | en_US |
| dc.subject (關鍵詞) | Routing flexibility | en_US |
| dc.subject (關鍵詞) | Machine flexibility | en_US |
| dc.subject (關鍵詞) | Environmental uncertainty | en_US |
| dc.subject (關鍵詞) | Wafer fabrication | en_US |
| dc.title (題名) | 產品多樣性及製造彈性對生產績效與生產成本之影響：晶圓代工廠商之實地實證研究 | zh_TW |
| dc.type (資料類型) | thesis | en |
| dc.relation.reference (參考文獻) | 一、中文文獻： | zh_TW |
| dc.relation.reference (參考文獻) | 李惠娟，民89年，半導體產業設備產能使用效率影響因素之實地實證研究，國立政治大學會計研究所未出版碩士論文。 | zh_TW |
| dc.relation.reference (參考文獻) | 林祖嘉、方世調，民81年，台北市紡織業與食品業廠商存活期間之分析，經濟論文 20(1)：59-91頁。 | zh_TW |
| dc.relation.reference (參考文獻) | 張俊彥，鄭晃忠，民86年，積體電路製程及設備技術手冊，中華民國產業科技發展協進會。 | zh_TW |
| dc.relation.reference (參考文獻) | 二、 英文文獻： | zh_TW |
| dc.relation.reference (參考文獻) | Ahrens, T. and J. Dent. 1998. Accounting and Organizations: Realizing the Richness of Field Research. Journal of Management Accounting Research 10:1-39. | zh_TW |
| dc.relation.reference (參考文獻) | Anderson, S. 1995. Measuring the Impact of Product Mix Heterogeneity on Manufacturing Overhead Cost. The Accounting Review 70 (3): 363-387. | zh_TW |
| dc.relation.reference (參考文獻) | Anderson, S. 2001. Direct and Indirect Effects of Product Mix characteristics on Capacity Management Decisions and Operating Performance. International Journal of Flexible Manufacturing Systems 13: 241-265. | zh_TW |
| dc.relation.reference (參考文獻) | Anupindi, R., S. Chopra, S. Deshmukh, J. Mieghem, and E. Zemel. 1999. Managing Business Process Flows. New Jersey: Prentice-Hall. | zh_TW |
| dc.relation.reference (參考文獻) | Balakrishnan, R. and N. Soderstrom. 2000. The Cost of System Congestion: Evidence from the Healthcare Sector. Journal of Management Accounting Research 12: 97-114. | zh_TW |
| dc.relation.reference (參考文獻) | Banker, R., S. Datar, and S. Kekre. 1988. Relevant Costs, Congestion and Stochasticity in Production Environments. Journal of Accounting and Economics 10: 171-197. | zh_TW |
| dc.relation.reference (參考文獻) | Banker, R. and H. Johnston. 1993. An Empirical Study of Cost Drivers in the U.S. Airline Industry. The Accounting Review 68 (July): 576-601. | zh_TW |
| dc.relation.reference (參考文獻) | Banker, R., G. Potter, and R. Schroeder. 1995. An Empirical Analysis of Manufacturing Overhead Cost Drivers. Journal of Accounting and Economics 19: 115-137. | zh_TW |
| dc.relation.reference (參考文獻) | Beach, R., A. Muhlemann, D. Price, A. Paterson, and J. Sharp. 2000. A Review of Manufacturing Flexibility. European Journal of Operational Research 122: 41-57. | zh_TW |
| dc.relation.reference (參考文獻) | Berry, W. and M. Cooper. 1999. Manufacturing Flexibility: Methods for Measuring the Impact of Product Variety on Performance in Process Industries. Journal of Operations Management 17: 163-178. | zh_TW |
| dc.relation.reference (參考文獻) | Benjaaffar, S. 1994. Models for Performance Evaluation of Flexibility in Manufacturing Systems. International Journal of Production Research 32 (6): 1383-1402. | zh_TW |
| dc.relation.reference (參考文獻) | Benjaafar, S. 1995. Effect of Routing and Machine Flexibility on Manufacturing Performance. International Journal of Integrated Manufacturing 8(4): 265-279. | zh_TW |
| dc.relation.reference (參考文獻) | Benjaafar, S. 1996. Modeling and Analysis of Machine Sharing in Manufacturing Systems. European Journal of Operational Research 91: 56-73. | zh_TW |
| dc.relation.reference (參考文獻) | Benjaafar, S. and D. Gupta. 1998. Scope versus Focus: Issues of Flexibility, Capacity, and Number of Production Facilities. IIE Transactions 30: 413-425. | zh_TW |
| dc.relation.reference (參考文獻) | Bohn, R. 1995. Noise and Learning in Semiconductor Manufacturing. Management Science 41(1): 31-42. | zh_TW |
| dc.relation.reference (參考文獻) | Boyer, K. and G. Leong. 1996. Manufacturing Flexibility at the Plant Level. Omega, International Journal of Management Science 24 (5): 495-510. | zh_TW |
| dc.relation.reference (參考文獻) | Browne, J., D. Dubois, K. Rathmill, S. Sethi, and K. Stecke. 1984. Classification of Flexible Manufacturing Systems. The FMS Magazine 2(2): 114-117. | zh_TW |
| dc.relation.reference (參考文獻) | Brill, P. and M. Mandelbaum. 1987. On Measuring of Flexibility in Manufacturing Systems. Working Paper. University of Windsor, Windsor, Ontario. | zh_TW |
| dc.relation.reference (參考文獻) | Buzacott, J. and J. Shanthikumar. 1993. Stochastic Modeling of Manufacturing Systems. New Jersey: Prentice Hall. | zh_TW |
| dc.relation.reference (參考文獻) | Chandra, P. and M. Tombak. 1992. Models for the Evaluation of Routing and Machine Flexibility. European Journal of Operational Research 60: 156-165. | zh_TW |
| dc.relation.reference (參考文獻) | Chang, S., N. Lin, and C. Sheu. 2002. Aligning Manufacturing Flexibility with Environmental Uncertainty: Evidence from High-Technology Component Manufacturers in Taiwan. International Journal of Production Research 40(18):4765-4780. | zh_TW |
| dc.relation.reference (參考文獻) | Chen, J., R. Clinton., and C. Chung. 1992. The Marketing-Manufacturing Interface and Manufacturing Flexibility. Omega 20(4): 431-443. | zh_TW |
| dc.relation.reference (參考文獻) | Connors, D., G. Feigin, and D. Yao. 1996. A Queueing Network Model for Semiconductor Manufacturing. IEEE Transactions on Semiconductor Manufacturing 9 (3): 412-427. | zh_TW |
| dc.relation.reference (參考文獻) | Cooper, R. and R. Kaplan. 1991. The Design of Cost Management Systems. Prentice Hall, Englewood Cliffs, NJ. | zh_TW |
| dc.relation.reference (參考文獻) | Cooper, W., K. Sinha, and R. Sullivan. 1995. Accounting for Complexity in Costing High Technology Manufacturing. European Journal of Operational Research 85: 316-326. | zh_TW |
| dc.relation.reference (參考文獻) | Correa, H. 1994. Linking Flexibility, Uncertainty and Variability in Manufacturing Systems. Avebury Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Correa, H. and N. Slack. 1996. Framework to Analyze Flexibility and Unplanned Change in Manufacturing Systems. Computer Integrated Manufacturing Systems 9(1): 57-64. | zh_TW |
| dc.relation.reference (參考文獻) | Das, S. and P. Nagendra 1993. Investigations into the Impact of Flexibility on Manufacturing Performance. International Journal of Production Research 31 (10): 2337-2354. | zh_TW |
| dc.relation.reference (參考文獻) | Datar, S., S. Kekre, T. Mukhopadhyay, and K. Srinivasan. Simultaneous Estimation of Cost Drivers. The Accounting Review 68 (July): 602-614. | zh_TW |
| dc.relation.reference (參考文獻) | De Groote, X. 1994c. The Flexibility of Production Processes: A General Framework. Management Science 40 (7): 933-945. | zh_TW |
| dc.relation.reference (參考文獻) | De Toni., A. and S. Tochia. 1998. Manufacturing Flexibility: A Literature Review. International Journal of Production Research 36(6):1587-1617. | zh_TW |
| dc.relation.reference (參考文獻) | Dopuch, N. and M. Gupta. 1994. Economic Effects of Production Changes: Accounting Implications. Journal of Management Accounting Research Fall(6):1-23. | zh_TW |
| dc.relation.reference (參考文獻) | Fisher, M., K. Ramdas, and K. Ulrich. 1999. Component Sharing in the Management of Product Variety: A Study of Automotive Braking Systems. Management Science 45 (3): 297-315. | zh_TW |
| dc.relation.reference (參考文獻) | Fisher, M. and C. Ittner. 1999. The Impact of Product Variety on Automobile Assembly Operations: Empirical Evidence and Simulation Analysis. Management Science 45 (6): 771-786. | zh_TW |
| dc.relation.reference (參考文獻) | Foster, G. and M. Gupta. 1990. Manufacturing Overhead Cost Driver Analysis. Journal of Accounting and Economics 12(Spring): 309-337. | zh_TW |
| dc.relation.reference (參考文獻) | Foster, G. and S. Young. 1997. Frontiers of Management Accounting Research. Journal of Management Accounting Research 9: 63-77. | zh_TW |
| dc.relation.reference (參考文獻) | Garvin, D. 1988. Managing Quality.: The Strategic and Competitive Edge. New York: The Free Press. | zh_TW |
| dc.relation.reference (參考文獻) | Gerwin, D. 1987. An Agenda for Research on the Flexibility of Manufacturing Processes. International Journal of Operations and Production Management 7(1): 38-49. | zh_TW |
| dc.relation.reference (參考文獻) | Gerwin, D.1993. Manufacturing Flexibility: A Strategic Perspective. Management Science 39 (4): 395-410. | zh_TW |
| dc.relation.reference (參考文獻) | Graves, S. and W. Jordan. 1991. An Analytic Approach for Demonstrating the Benefits of Limited Flexibility. GM Research Laboratories Research Publication GMR-7341. | zh_TW |
| dc.relation.reference (參考文獻) | Greene, W. 1997. Econometric Analysis. 3th Ed. New Jersey: Prentice-Hall, Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Gross, D. and C. Harris. 1998. Fundamentals of Queueing Theory. 3th Ed. John Wiley & Sons, Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Gupta., Y. and S. Goyal. 1989. Flexibility of Manufacturing Systems: Concepts and Measurements. European Journal of Operational Research 43: 119-135. | zh_TW |
| dc.relation.reference (參考文獻) | Gupta, M., T. Randall, and A. Wu. 2001. Association between Capacity, Congestion, and Manufacturing Productivity. Working Paper, American Accounting Association Annual Meeting. | zh_TW |
| dc.relation.reference (參考文獻) | Gupta, D. and M. Srinivasan. 1998. Note: How Does Product Proliferation Affect Responsiveness? Management Science 44 (7): 1017-1020. | zh_TW |
| dc.relation.reference (參考文獻) | Hair, J., R. Anderson, R. Tatham, and W. Black. 1998. Multivariate Data Analysis. 6th Ed. Prentice-Hall Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Hatch, N. and D. Mowery. 1998. Process Innovation and Learning by Doing in Semiconductor Manufacturing. Management Science 44(11): 1461-1477. | zh_TW |
| dc.relation.reference (參考文獻) | Hatcher, L. 1994. A Step-by-Step Approach to Using the SAS System for Factor Analysis and Structural Equation Modeling. Cary, NC: SAS Institute Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Heizer, J. and B Render. 2001. Operations Management, 6th Ed. New York: Prentice-Hall. | zh_TW |
| dc.relation.reference (參考文獻) | Hopp, J. and M. Spearman. 1996. Factory Physics: Foundations of Manufacturing Management. Irwin, Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Ittner, C. and D. Larcker. 2001. Assessing Empirical Research in Managerial Accounting: A Value-Based Management Perspective. Journal of Accounting and Economics 32: 349-410. | zh_TW |
| dc.relation.reference (參考文獻) | Jeng, M., X. Xie, and S. Chou. 1998. Modeling, Qualitative Analysis, and Performance Evaluation of the Etching Area in an IC Wafer Fabrication System Using Petri Nets. IEEE Transactions on Semiconductor Manufacturing 11(3): 358-373. | zh_TW |
| dc.relation.reference (參考文獻) | Jenson, B. 2000. The Impact of Resource Flexibility and Staffing Decisions on Cellular and Departmental Shop Performance. European Journal of Operational Research 127: 279-296. | zh_TW |
| dc.relation.reference (參考文獻) | Jordan, W. and S. Graves. 1995. Principles on the Benefits of Manufacturing Process Flexibility. Management Science 41(4): 577-594. | zh_TW |
| dc.relation.reference (參考文獻) | Kaplan, R. and R. Cooper. 1998. Cost and Effect: Using Integrated Cost Systems to Drive Profitability and Performance. Harvard School Business Press. | zh_TW |
| dc.relation.reference (參考文獻) | Karmarkar, U. 1987. Lot Sizes, Lead Times and In-Process Inventories. Management Science 33 (March): 409-417. | zh_TW |
| dc.relation.reference (參考文獻) | Karmarkar, U. and S. Kekre. 1989. Manufacturing Configuration, Capacity and Mix Decisions Considering Operational Costs. Journal of Manufacturing Systems (6): 315-324. | zh_TW |
| dc.relation.reference (參考文獻) | Kekre, S. and K. Srinivasan. 1990. Broader Product Line: A Necessity to Achieve Success? Management Science 36(10):1216-1231. | zh_TW |
| dc.relation.reference (參考文獻) | Klammer, T. 1996. Capacity Measurement and Improvement: A Manager’s Guide to Evaluating and Optimizing Capacity Productivity. Irwin, Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Koste, L. and M. Malhotra. 1999. A Theoretical Framework for Analyzing the Dimensions of Manufacturing Flexibility. Journal of Operations Management 18: 75-93. | zh_TW |
| dc.relation.reference (參考文獻) | Koste, L. and M. Malhotra. 2000. Trade-offs Among the Elements of Flexibility: A Comparison from the Automotive Industry. Omega 28: 693-710. | zh_TW |
| dc.relation.reference (參考文獻) | Krishnan, V. and S. Gupta. 2001. Appropriateness and Impact of Platform-based Product Development. Management Science 47(1): 52-68. | zh_TW |
| dc.relation.reference (參考文獻) | Lancaster, K. 1990. The Economics of Product Variety: A Survey. Marketing Science 9 (Summer): 189-206. | zh_TW |
| dc.relation.reference (參考文獻) | Mascarenhas, B. 1981. Planning for Flexibility. Long Range Planning 14(5): 78-82. | zh_TW |
| dc.relation.reference (參考文獻) | McDuffie, J., K. Sethuraman, and M. Fisher. 1996. Product Variety and Manufacturing Performance: Evidence from the International Automotive Assembly Plant Study. Management Science 42 (March): 350-369. | zh_TW |
| dc.relation.reference (參考文獻) | McNair, C. and R. Vangermeersch. 1998. Total Capacity Management: Optimizing at the Operational, Tactical, and Strategic Levels. IMA Foundation for Applied Research. | zh_TW |
| dc.relation.reference (參考文獻) | Miller, J. and T. Vollmann. 1985. The Hidden Factory. Harvard Business Review 63(5): 142-150. | zh_TW |
| dc.relation.reference (參考文獻) | Mueller, R. 1996. Basic Principles of Structural Equation Modeling: An Introduciton to LISREL and EQS. Springer-Verlag New York, Inc. | zh_TW |
| dc.relation.reference (參考文獻) | Nandkeolyar, U. and D. Christy. 1992. An Investigation of the Effect of Machine Flexibility and Number of Part Families on System Performance. International Journal of Production Research 30 (3): 513-526. | zh_TW |
| dc.relation.reference (參考文獻) | Narahari, Y. and L. Khan. 1997. Modeling the Effect of Hot Lots in Semiconductor Manufacturing Systems. IEEE Transactions on Semiconductor Manufacturing 10 (1): 185-188. | zh_TW |
| dc.relation.reference (參考文獻) | Newman, W., M. Hanna, and M. Maffei. 1993. Dealing with the Uncertainties of Manufacturing: Flexibility, Buffers and Integration. International Journal of Operations and Production Management 13(1): 19-34. | zh_TW |
| dc.relation.reference (參考文獻) | Pagell, M and D. Krause. 1999. A Multiple-Method Study of Environmental Uncertainty and Manufacturing Flexibility. Journal of Operations Management 17: 307-325. | zh_TW |
| dc.relation.reference (參考文獻) | Randall, T. and K. Ulrich. 2001. Product Variety, Supply Chain Structure, and Firm Performance: Analysis of the U.S. Bicycle Industry. Management Science 47(12): 1588-1604. | zh_TW |
| dc.relation.reference (參考文獻) | Sethi A. and S. Sethi. 1990. Flexibility in Manufacturing: A Survey. The International Journal of Flexible Manufacturing Systems (2): 289-328. | zh_TW |
| dc.relation.reference (參考文獻) | Slack, N. 1983. Flexibility as a Manufacturing Objective. International Journal of Operations and Production Management 3(3): 4-13. | zh_TW |
| dc.relation.reference (參考文獻) | Son, Y. and C. Park. 1987. Economic Measure of Productivity, Quality and Flexibility in Advanced Manufacturing Systems. Journal of Manufacturing Systems 6 (3): 193-207. | zh_TW |
| dc.relation.reference (參考文獻) | Stecke, K. and I. Kim. 1989. Performance Evaluation for Systems of Pooled Machines of Unequal Sizes: Unbalancing versus Balancing. European Journal of Operational Research 42 (1): 22-38. | zh_TW |
| dc.relation.reference (參考文獻) | Suarez, F., M. Cusumano, and C. Fine. 1996. An Empirical Study of Manufacturing Flexibility in Printed Circuit Board Assembly. Operations Research 44 (1): 223-239. | zh_TW |
| dc.relation.reference (參考文獻) | Swamidass, P. and W. Newell. 1987. Manufacturing Strategy, Environmental Uncertainty and Performance: A Path Analytic Model. Management Science 33(4): 509-524. | zh_TW |
| dc.relation.reference (參考文獻) | Tsubone, H. and M. Horikawa. 1999. A Comparison Between Machine Flexibility and Routing Flexibility. International Journal of Flexible Manufacturing Systems 11: 83-101. | zh_TW |
| dc.relation.reference (參考文獻) | Upton, D. 1994. The Management of Manufacturing Flexibility. California Management Review (Win): 72-89. | zh_TW |
| dc.relation.reference (參考文獻) | Upton, D. 1995. What Really Makes Factories Flexible? Harvard Business Review (July-Aug): 74-84. | zh_TW |
| dc.relation.reference (參考文獻) | Upton, D. 1997. Process Range in Manufacturing: An Empirical Study of Flexibility. Management Science 43 (8): 1079-1092. | zh_TW |
| dc.relation.reference (參考文獻) | Van Zant, P. 2000. Microchip Fabrication: A Practical Guide to Semiconductor Processing. 4th Ed. McGraw-Hill. | zh_TW |
| dc.relation.reference (參考文獻) | Vokurka, R. and S. O’Leary-Kelly. 2000. A Review of Empirical Research on Manufacturing Flexibility. Journal of Operational Management 18: 485-501. | zh_TW |
