Publications-Theses

Article View/Open

Publication Export

Google ScholarTM

NCCU Library

Citation Infomation

Related Publications in TAIR

題名 管理上游供應鏈風險與危機之研究-以在大陸地區從事採購的小型外商為例
Managing upstream supply chain risks and crises - The case of small foreign procurement companies in China
作者 徐景輝
Hsu, Ching-Huei
貢獻者 于卓民<br>羅明琇
徐景輝
Hsu, Ching-Huei
關鍵詞 供應鏈
危機管理
小型外商
信任
供應商選擇
Supply chain
Crisis management
Small foreign firms
Trust
Supplier selection
日期 2021
上傳時間 2-Sep-2021 15:34:49 (UTC+8)
摘要 大陸自1970年代末期開始改革開放後,一步步邁向世界工廠,外商向大陸採購商品的金額、數量及品項都呈現上漲的趨勢。在中美貿易戰、勞工薪資上漲和新冠肺炎疫情影響下,全球都意識到供應鏈過度集中的風險,但短期內大陸 地位仍無法取代。
實務顯示,小型外商公司傾向與中小型工廠合作以取得採購優勢或至少對等地位,但體質不佳的中小型工廠在發生危機時處理和復原能力較弱,嚴重時 就走上倒閉一途;有的企業主甚至根本沒有處理的意願,而選擇另起爐灶。任一 狀況,都會直接危及在大陸採購的小型外商公司的營運。
固然供應鏈危機的發生機率高低與小型外商的供應鏈規劃有關,但代工廠 不一定有足夠的供應鏈專業,又即便做了事前的供應鏈規劃並不代表是合宜並有 風險管理考量的規劃,更不必然就不會發生供應鏈危機。再者,代工廠並非擁有完全的供應鏈主導權,或受客戶關係人的影響,但在供應鏈出事後卻仍必須承擔責任。
一旦供應鏈出現危機,其影響可能涵蓋到公司內部員工、股東、上游供應商、地方政府相關局處、銀行團和下游客戶等重要關係人,而上述重要關係人因立場不同並非一定存在有共同利益與目標,甚至存在諸多的利益衝突與矛盾,這些 因素與企業在發生供應鏈危機後的處理心態、速度、方法、層級、成本和取捨,與能否有效解決供應鏈危機,有相當程度的關聯。
本研究採用個案研究法,針對非天災或政府重大政策影響下,以一家台灣 企業為研究對象,針對在大陸所發生的四個供應鏈風險與危機相關的個案進行 深度研究,分別以烤爐和藍芽產品兩個特性不同的產業為取樣的標的,藉以作為機械類產品和電子類產品的代表。
個案涵蓋了數十家的產地上游供應商、代工廠、產地出口商及市場端進口商和品牌商,出口商包含荷蘭、瑞典和台灣的小型外商。個案分析發現,在常見的供應鏈管理與供應鏈風險管理外,「處理供應鏈重大危機」乃至於「處理危機事件的二次風險防範」,是支持供應鏈運轉流暢而不斷鏈的重要補強能力,此能力的體現與「信任」、「資源」及「風險意識」有密不可分的關聯。根據分析結果,本研究提出供應鏈風險與危機處理之完整架構,輔以所列出之研究發現,有助於小型外商公司在大陸管理上游供應鏈之風險與危機。
China opens its door to the West in late 1970s and has become the world factory, illustrated by the increasing items, volume and value of procurement by foreign firms from China. Due to the trade war between China and the United States, rising wages and COVID-19, the risks of totally relying on the supply chain in China have been well recognized, but, in the short-run, to replace the role of China is not easy.
In China, small foreign firms prefer to do business with small or medium-sized local suppliers in order to obtain advantage in purchasing or maintain relatively favorable position. However, these local firms are less able to handle and recover from crises and even go bankruptcy in worse situations. Sometimes the owners of these firms would rather to restart a new business instead of putting efforts to deal with crises. These problematic situations can cause foreign firm’s operations in jeopardy.
Although the probability of supply chain crises is related to the supply chain planning of small foreign firms, subcontractors may not possess the knowledge and expertise of supply chain management. Further, even with these capabilities, a plan by a subcontractor may not take into the risks involved and avoid the occurrence of crises. Practices also show that firms still bear responsibilities even when they do not have total control of supply chain or take suppliers with the suggestions of their clients.
Once a supply chain crisis is formed, all stakeholders – employees, shareholders, upstream suppliers, local government agencies, banks and clients – are involved and affected. These stakeholders may not share common interests and similar objectives; on the contrary, among them, there may exist contradictions and conflicts. These factors affect the mindset, speed, methods, level of managers involved, cost, and tradeoff of the solution to a supply chain crisis for the firm facing the crisis.
Excluding nature disasters and significant changes of government policies, using a Taiwanese firm as the research object and taking a case study approach, this study examined four cases related to supply chain risks and crises in China. These cases covered two different products (i.e., BBQ grills for mechanical products and Bluetooth devices for electronics products) and many firms in China, the Netherland, Sweden and Taiwan, serving as subcontractors, suppliers, exporters, importers and branding buyers.
In addition to the often-mentioned practices and mechanisms of supply chain management and supply chain risk management, the cases findings reveal that dealing with critical supply chain crises as well as preventing secondary crises during the process of handling the first supply chain crisis can strengthen the capability to avoid the disruption of supply chain. Further, the essence to a firm’s capability of handling supply chain crises is trust, resources and awareness of risks. The research findings are summarized in a framework and stated as lessons which are helpful to small foreign firms coping with supply chain risk and crises in China, or in an environment with high uncertainly.
參考文獻 于卓民(2013),國際企業:環境與管理。台北:華泰文化。
于卓民(2015),「信任不是放任」,財訊,492期,30。
于卓民(2018),「關於信任這堂課」,財訊,545期,28。
于卓民(2020),「勿讓風險變危機」,財訊,608期,22。
王慶剛(2021),「打破「精實生產」,豐田為何不怕晶片荒?」,天下雜誌,723期,80-82。
王慶剛(2021),「愈危機,愈超越!4步驟教你企業韌性」,天下雜誌,723期,84-86。
司徒達賢(2017),管理學的新世界。台北:天下文化。
白宗城(2018),「供應商進度落後,該怎麼辦?」,EMBA雜誌,383期,128-134。
朱延智(2012),企業危機管理。台北:五南圖書。
吳思華(2000),策略九說:策略思考的本質。台北:城邦文化。
洪慧方、林俊宏譯(2018),Stuart Diamond (2017)著,華頓商學院最受歡迎的談判課。台北市:先覺出版。
徐景輝、于卓民、羅明琇(2021),「海榮國際股份有限公司-供應鏈危機」,產業與管理論壇,23(2), 52-70。
湯明哲、李吉仁、黃崇興(2014),管理相對論。台北市:城邦商業周刊文化事業,331-337, 454-460。
蔡鴻青(2020),百年企業策略轉折點。台北:早安財經文化。
Akacum, A. & B. G. Dale (1995), “Supplier partnering: Case study experiences,” International Journal of Purchasing and Materials Management, 31(1), 38-44.

Arruñada, Benito & Xosé H. Vázquez (2006), “When your contract manufacture becomes your competitor-best practice, “Harvard Business Review, September, 135-143.

Barney, Jay (1991), “Firm resources and sustained competitive advantage,” Journal of Management, 17(1), 99-120.

Becker, G. S. (1964), Human Capital, New York: Columbia University Press.

Bierly, III E. Paul & Scott Gallagher (2007), “Explaining alliance partner selection: fit, trust and strategic expediency,” Long Range Planning, 40(2), 134-153.

Birou, L. M. & S. E. Fawcett (1993), “International purchasing: benefits, requirements, and challenges,” International Journal of Purchasing & Materials Management, 29(2), 28-37.

Burtonshaw-Gunn, S. A. (2008), The Essential Management Toolbox: Tools, Models and Notes for Managers and Consultants, Chichester, UK: John Wiley & Sons.

Calhoun, Mikelle A. (2002), “Unpacking liability of foreignness: identifying culturally driven external & internal sources of liability for the foreign subsidiary,” Journal of International Management, 8, 301-321.

Cavinato, Joseph L. (2004), “Supply chain logistics risks; from the back room to the board roomInternational Journal of Physical Distribution & Logistics Management, 34(5), 383-387.

Cho, J. & J. Kang (2001), “Benefits and challenges of global sourcing: perceptions of US apparel retail firms,” International Marketing Review, 18(5), 542-561.

Chopra, S. & M. S. Sodhi (2004), “Managing risk to avoid supply-chain breakdown,” MIT Sloan Management Review, 46(1), 53-62.
Cucchiella, Fedrica & Massimo Gastaldi (2006), “Risk management in supply chain: a real option approach,” Journal of Manufacturing Technology Management, 17(6), 700-720.

Chiles, T. H. and J. F. McMackin (1996), “Integrating variable risk preferences, trust, and transaction cost economics," Academy of Management Review, 21(1), 73-99.

Christopher, Martin (1992), Logistic and Supply Chain Management, UK: Pitman Publishing, London.

Christopher, Martin (1992), Logistics: The Strategic Issues, UK: Chapman and Hall London.

Craighead, C. W., Blackhurst, J., Rungtusanatham, J. M. & Robert B. Handfield (2007), “The severity of supply chain disruptions: Design characteristics & mitigation capabilities,” Decision Sciences, 38(1), 131-156.

Christopher, Martin & Helen Peck (2004), “Building the resilient supply chain,” International Journal of Logistics Management, 15(2), 1-13.

Das, T. K. & Bing-Sheng Teng (2000), “A resource-based theory of strategic alliances,” Journal of Management, 26(1), 31–61.

Fisher, Marshall L. (1997), “What is the right supply chain for your product?” Harvard Business Review, March-April, 105-116.

Franceschini, F., Galetto, M., Pignatelli, A. & M. Varetto (2003), “Outsourcing: Guidelines for a structured approach,” Benchmarking: An International Journal, 10(3), 246-260.

Freeman, J., Carroll, G. R. & M. T. Hannan (1983), “The liability of newness: Age dependence in organizational death rates,” American Sociological Review, 48(5), 692-710.

Gandhi, J. S., Gorod, A. & Brian Sauser (2012), “Prioritization of outsourcing risks from a systemic perspective, “ Strategic Outsourcing: An International Journal, 5(1), 39-71.

Ghadge, A., Dani, S., Chester, M. & Roy Kalawsky (2013), “A systems approach for modelling supply chain risks,” Supply Chain Management: An International Journal,18(5), 523–538.

Giunipero, Larry C. & Reham Aly Eltantawy (2004), “Securing the upstream supply chain:a risk management approach,” International Journal of Physical Distribution & Logistic Management, 34 (9), 698-713.

Hanson, Gordon H. (2020), “Who will fill China`s shoes? The global evolution of labor-Intensive manufacturing” National Bureau of Economic Research, working paper, 28313, 1-23.

Heckmann, I., Comes, T. & Stefan Nickel (2015), “A critical review on supply chain risk - Definition, measure and modeling,” Omega, 52, 119–132.

Hoffmann, Werner H. & Roman Schlosser (2001), “Success factors of strategic alliances in small and medium-sized enterprises - An empirical survey,” Long Range Planning, 34, 357-381.

Hult, G. T. M. (1997), “Measuring cycle time of the global procurement process,” Industrial Marketing Management, 26(5), 403-12.

Johnson, M.E. (2001), “Learning from toys: lessons in managing supply chain risk from the toy industry”, California Management Review, 43(3), 106-124.

Juttner, Uta (2005), “Supply chain risk management - Understanding the business requirements from a practitioner perspective,” The International Journal of Logistics Management, 16(1), 120-141.

Juttner, U., Peck, H. & M. Christopher (2003), “Supply chain risk management: outlining an agenda for future research,” International Journal of Logistics Research and Applications, 6(4), 197–210.

Kleindorfer, Paul R. & Germaine H. Saad (2005), “Managing disruption risks in supply chains,” Production & Operations Management, 14(1), 53-68.

Laeequddin, M., Sahay, B. S., Sahay, V. & K. A. Waheed (2010), “Measuring trust in supply chain partner’s relationships,” Measuring Business Excellence, 14(3), 53-69.

Lagadec, Patrick (1993), Preventing Chaos in A Crisis: Strategies for Prevention, Control and Damage Limitation, NY: McGraw-Hill.

Lambert, D. M., Emmelhainz, M. A. & John T. Gardner (1996), “Developing and implementing supply chain partnerships,” The International Journal of Logistics Management, 7(2), 1-17.

Larson, P. & J. Kulchitsky (1998), “Single sourcing and supplier certification: performance and relationship implications,” Industrial Marketing Management, 27(1), 73-81.

Latour, Almar (2001), “Trial by fire: A Blaze in Albuquerque sets off major crisis for cell-phone giants,” The Wall Street Journal, 1A.

Lee, H., Padmanabhan, V. & S. Wang (1997), “Information distortion in a supply chain: the bullwhip effect”, Management Science, 43(4), 546-558.

Li, Xianhong & Ian Barnes (2008), “Proactive supply risk management methods for building a robust supply selection process when sourcing from emerging markets,” Strategic Outsourcing: An International Journal, 1(3), 252-267.

MacKinnon, M. (2002), “The security team: these online services back up B2B security,” Purchasing B2B.

Mandal, Anukul & S.G. Deshmukh (1993), “Vendor selection using interpretive structural modelling (ISM),” International Journal of Operations & Production Management, 14(6), 52-59.

Manuj, Ila & John T. Mentzer (2008), “Global supply chain risk management strategies,” International Journal of Physical Distribution & Logistic Management, 38(3),192-223.

Mason-Jones, R., Naylor, B. & Denis R. Towill (2000), “Lean, agile or leagile? Matching your supply chain to the marketplace,” International Journal of Production Research, 38(17), 4051-4070.

Mayer, Roger C., Davis, James H. & F. David Schoorman (1995), “An integrative model of organizational trust,” Academy of Management Review, 20(3), 709-734.

McCutcheon, David & F. Ian Stuart (2000), “Issues in the choice of supplier alliance partners,” Journal of Operations Management,18, 279-301.

Monczka, R. M., Petersen, K. J., Handfield, R. B. & Gary L. Ragatz (1998), “Success factors in strategic supplier alliances: The buying company perspective,” Decision Sciences, 29(3), 553-557.

Moritz, Brent B. & Christopher W. Craighead (2015), “Ashmark Corporation: Dealing with a supply disruption,” Richard Ivey School of Business Foundation, W15357.

Natarajarathinam, M., Capar, I. & Arunachalam Narayanan (2009), “Managing supply chains in times of crisis: a review of literature and insights,” International Journal of Physical Distribution & Logistics Management, 39(7), 535-573.

Oke, Adegoke & Mohan Gopalakrishnan (2009), “Managing disruptions in supply chains: A case study of a retail supply chain,” International Journal Production Economics, 118, 168-174.

Oliver, R. K. & M. D. Webber (1982), “Supply-chain management: logistics catches up with strategy,” Outlook, 5(1), 42-47.

Olson, David L. & Desheng Dash Wu (2010), “A review of enterprise risk management in supply chain,” Kybernetes, 39(5), 694-706.

Ritchie, B. & C. Brindley (2007), “An emergent framework for supply chain risk management and performance measurement,” Journal of the Operational Research Society, 58, 1398-1411.

Rurach, Cchristian F., Glasen, Patrick C. & Frank Straube (2017), “Disruption causes and disruption management in supply chains with Chinese suppliers - Managing cultural differences,” International Journal of Physical Distribution & Logistics Management, 47(9), 843-863.

Singh, K. (1998), “The impact of technological complexity and interfirm cooperation on business survival,” Academy of Management Journal, 40(2), 339-369.

Sinha, P.R., Whitman, L. E. & D. Malzahn (2004), “Methodology to mitigate supplier risk in an aerospace supply chain,” Supply Chain Management: An International Journal, 9(2), 154-168.

Skipper, Joseph B. & Joe B. Hanna (2009), “Minimizing supply chain disruption risk through enhanced flexibility,” International Journal of Physical Distribution & Logistics Management, 39(5), 404-427.

Sohdi, Manmohan S. & Christopher S. Tang (2012), Managing Supply Chain Risk, International Series in Operations Research & Management Science. NY: Dordrecht Heidelberg London.

Spekman, R. E. & E. W. Davis (2004), “Risky business: expanding the discussion on risk and the extended enterprise,” International Journal of Physical Distribution & Logistics Management, 34(5), 414-433.

Stewart, Gordon (1997), “Supply-chain operations reference model (SCOR): the first cross-industry framework for integrated supply-chain management,” Logistics Information Management, 10(2), 62–67.

Stinchombe, Arthur L. (1965), “Organization and social structure,” In James G. March (ed.), Handbook of Organizations, 153-193. Chicago: Rand-McNally

Tachizawa, E. M. & C. Y. Wong (2014), “Towards a theory of multi-tier sustainable supply chains: a systematic literature review,” Supply Chain Management: An International Journal, 19(5/6), 643-663.

Tomer, J. F. (1987), Organizational Capital: The Path of Higher Productivity and Well-being, New York: Praeger.

Tejpal, G., Garg, R.K. & A. Sachdeva (2013), “Trust among supply chain partners: a review,” Measuring Business Excellence, 17(1), 51-71.

Tomlin, Brian (2006), “On the value of mitigation and contingency strategies for managing supply chain disruption risks,” Management Science, 52(5), 639-657.

Tummala, Rao & Tobias Schoenherr (2011), “Assessing and managing risks using the supply chain risk management process (SCRMP),” Supply Chain Management: An International Journal, 16(6), 474–483.

Wiseman, R.M. & L. R. Gomez-Mejia (1998), “A behavioral agency model of managerial risk taking,” Academy of Management Review, 23(1), 133-155.
Williamson, O. (1975), Market and Hierarchies, NY: Free Press.

Wu, T., Blackhurst, J. & P. O’Frady (2007), “Methodology for supply chain disruption analysis,” International Journal of Production Research, 45(7), 1665-1682.

Yan, Aimin & Barbara Gary (1994), “Bargaining power, management control, and performance in China,” Academy of Management Journal, 37(6), 1478-1517.

Yates, J. F. & E. R. Stone (1992), Risk Appraisal, In J. F. Yates (Ed.), Wiley series in human performance and cognition. Risk-taking Behavior, 49-85. NY: John Wiley & Sons.

Zaheer, Srilata (1995), “Overcoming the liability of foreignness,” Academy of Management Journal, 38(2), 341-363.

Zsidisin, G. A. (2003a), “Managerial perceptions of supply risk,” Journal of Supply Chain Management: A Global Review of Purchasing & Supply, 39(1), 14-23.

Zsidisin, G. A. & L. M. Ellram (2003), “An agency theory investigation of supply risk management,” Journal of Supply Chain Management: A Global Review of Purchasing & Supply, 39(3), 15-27.
描述 博士
國立政治大學
企業管理學系
106355503
資料來源 http://thesis.lib.nccu.edu.tw/record/#G0106355503
資料類型 thesis
dc.contributor.advisor 于卓民<br>羅明琇zh_TW
dc.contributor.author (Authors) 徐景輝zh_TW
dc.contributor.author (Authors) Hsu, Ching-Hueien_US
dc.creator (作者) 徐景輝zh_TW
dc.creator (作者) Hsu, Ching-Hueien_US
dc.date (日期) 2021en_US
dc.date.accessioned 2-Sep-2021 15:34:49 (UTC+8)-
dc.date.available 2-Sep-2021 15:34:49 (UTC+8)-
dc.date.issued (上傳時間) 2-Sep-2021 15:34:49 (UTC+8)-
dc.identifier (Other Identifiers) G0106355503en_US
dc.identifier.uri (URI) http://nccur.lib.nccu.edu.tw/handle/140.119/136819-
dc.description (描述) 博士zh_TW
dc.description (描述) 國立政治大學zh_TW
dc.description (描述) 企業管理學系zh_TW
dc.description (描述) 106355503zh_TW
dc.description.abstract (摘要) 大陸自1970年代末期開始改革開放後,一步步邁向世界工廠,外商向大陸採購商品的金額、數量及品項都呈現上漲的趨勢。在中美貿易戰、勞工薪資上漲和新冠肺炎疫情影響下,全球都意識到供應鏈過度集中的風險,但短期內大陸 地位仍無法取代。
實務顯示,小型外商公司傾向與中小型工廠合作以取得採購優勢或至少對等地位,但體質不佳的中小型工廠在發生危機時處理和復原能力較弱,嚴重時 就走上倒閉一途;有的企業主甚至根本沒有處理的意願,而選擇另起爐灶。任一 狀況,都會直接危及在大陸採購的小型外商公司的營運。
固然供應鏈危機的發生機率高低與小型外商的供應鏈規劃有關,但代工廠 不一定有足夠的供應鏈專業,又即便做了事前的供應鏈規劃並不代表是合宜並有 風險管理考量的規劃,更不必然就不會發生供應鏈危機。再者,代工廠並非擁有完全的供應鏈主導權,或受客戶關係人的影響,但在供應鏈出事後卻仍必須承擔責任。
一旦供應鏈出現危機,其影響可能涵蓋到公司內部員工、股東、上游供應商、地方政府相關局處、銀行團和下游客戶等重要關係人,而上述重要關係人因立場不同並非一定存在有共同利益與目標,甚至存在諸多的利益衝突與矛盾,這些 因素與企業在發生供應鏈危機後的處理心態、速度、方法、層級、成本和取捨,與能否有效解決供應鏈危機,有相當程度的關聯。
本研究採用個案研究法,針對非天災或政府重大政策影響下,以一家台灣 企業為研究對象,針對在大陸所發生的四個供應鏈風險與危機相關的個案進行 深度研究,分別以烤爐和藍芽產品兩個特性不同的產業為取樣的標的,藉以作為機械類產品和電子類產品的代表。
個案涵蓋了數十家的產地上游供應商、代工廠、產地出口商及市場端進口商和品牌商,出口商包含荷蘭、瑞典和台灣的小型外商。個案分析發現,在常見的供應鏈管理與供應鏈風險管理外,「處理供應鏈重大危機」乃至於「處理危機事件的二次風險防範」,是支持供應鏈運轉流暢而不斷鏈的重要補強能力,此能力的體現與「信任」、「資源」及「風險意識」有密不可分的關聯。根據分析結果,本研究提出供應鏈風險與危機處理之完整架構,輔以所列出之研究發現,有助於小型外商公司在大陸管理上游供應鏈之風險與危機。
zh_TW
dc.description.abstract (摘要) China opens its door to the West in late 1970s and has become the world factory, illustrated by the increasing items, volume and value of procurement by foreign firms from China. Due to the trade war between China and the United States, rising wages and COVID-19, the risks of totally relying on the supply chain in China have been well recognized, but, in the short-run, to replace the role of China is not easy.
In China, small foreign firms prefer to do business with small or medium-sized local suppliers in order to obtain advantage in purchasing or maintain relatively favorable position. However, these local firms are less able to handle and recover from crises and even go bankruptcy in worse situations. Sometimes the owners of these firms would rather to restart a new business instead of putting efforts to deal with crises. These problematic situations can cause foreign firm’s operations in jeopardy.
Although the probability of supply chain crises is related to the supply chain planning of small foreign firms, subcontractors may not possess the knowledge and expertise of supply chain management. Further, even with these capabilities, a plan by a subcontractor may not take into the risks involved and avoid the occurrence of crises. Practices also show that firms still bear responsibilities even when they do not have total control of supply chain or take suppliers with the suggestions of their clients.
Once a supply chain crisis is formed, all stakeholders – employees, shareholders, upstream suppliers, local government agencies, banks and clients – are involved and affected. These stakeholders may not share common interests and similar objectives; on the contrary, among them, there may exist contradictions and conflicts. These factors affect the mindset, speed, methods, level of managers involved, cost, and tradeoff of the solution to a supply chain crisis for the firm facing the crisis.
Excluding nature disasters and significant changes of government policies, using a Taiwanese firm as the research object and taking a case study approach, this study examined four cases related to supply chain risks and crises in China. These cases covered two different products (i.e., BBQ grills for mechanical products and Bluetooth devices for electronics products) and many firms in China, the Netherland, Sweden and Taiwan, serving as subcontractors, suppliers, exporters, importers and branding buyers.
In addition to the often-mentioned practices and mechanisms of supply chain management and supply chain risk management, the cases findings reveal that dealing with critical supply chain crises as well as preventing secondary crises during the process of handling the first supply chain crisis can strengthen the capability to avoid the disruption of supply chain. Further, the essence to a firm’s capability of handling supply chain crises is trust, resources and awareness of risks. The research findings are summarized in a framework and stated as lessons which are helpful to small foreign firms coping with supply chain risk and crises in China, or in an environment with high uncertainly.
en_US
dc.description.tableofcontents 目次
誌謝 I
摘要 II
ABSTRACT IV
目次 VI
表次 VIII
圖次 X
第一章 研究議題與研究貢獻 1
第一節 研究動機與背景 2
第二節 研究議題說明 5
第三節 研究目的與預期貢獻 6
第四節 研究方法與論文章節說明 8
第二章 個案分析與研究發現 17
第一節 烤爐個案 17
第二節 藍芽個案 63
第三節 專利個案 88
第四節 研究發現總結 100
第三章 研究發現與理論意涵 105
第一節 供應鏈風險與危機 105
第二節 供應鏈之供應商選擇 117
第三節 危機處理中的風險 129
第四節 個案驗證與完整架構 132
第四章 結論與建議 150
第一節 研究結論 150
第二節 實務意涵與理論貢獻 157
第三節 研究限制與後續研究建議 161
參考文獻: 163
ㄧ、中文部分 163
二、英文部分 164
附錄一 海榮國際股份有限公司 - 供應鏈危機 171
zh_TW
dc.format.extent 2341223 bytes-
dc.format.mimetype application/pdf-
dc.source.uri (資料來源) http://thesis.lib.nccu.edu.tw/record/#G0106355503en_US
dc.subject (關鍵詞) 供應鏈zh_TW
dc.subject (關鍵詞) 危機管理zh_TW
dc.subject (關鍵詞) 小型外商zh_TW
dc.subject (關鍵詞) 信任zh_TW
dc.subject (關鍵詞) 供應商選擇zh_TW
dc.subject (關鍵詞) Supply chainen_US
dc.subject (關鍵詞) Crisis managementen_US
dc.subject (關鍵詞) Small foreign firmsen_US
dc.subject (關鍵詞) Trusten_US
dc.subject (關鍵詞) Supplier selectionen_US
dc.title (題名) 管理上游供應鏈風險與危機之研究-以在大陸地區從事採購的小型外商為例zh_TW
dc.title (題名) Managing upstream supply chain risks and crises - The case of small foreign procurement companies in Chinaen_US
dc.type (資料類型) thesisen_US
dc.relation.reference (參考文獻) 于卓民(2013),國際企業:環境與管理。台北:華泰文化。
于卓民(2015),「信任不是放任」,財訊,492期,30。
于卓民(2018),「關於信任這堂課」,財訊,545期,28。
于卓民(2020),「勿讓風險變危機」,財訊,608期,22。
王慶剛(2021),「打破「精實生產」,豐田為何不怕晶片荒?」,天下雜誌,723期,80-82。
王慶剛(2021),「愈危機,愈超越!4步驟教你企業韌性」,天下雜誌,723期,84-86。
司徒達賢(2017),管理學的新世界。台北:天下文化。
白宗城(2018),「供應商進度落後,該怎麼辦?」,EMBA雜誌,383期,128-134。
朱延智(2012),企業危機管理。台北:五南圖書。
吳思華(2000),策略九說:策略思考的本質。台北:城邦文化。
洪慧方、林俊宏譯(2018),Stuart Diamond (2017)著,華頓商學院最受歡迎的談判課。台北市:先覺出版。
徐景輝、于卓民、羅明琇(2021),「海榮國際股份有限公司-供應鏈危機」,產業與管理論壇,23(2), 52-70。
湯明哲、李吉仁、黃崇興(2014),管理相對論。台北市:城邦商業周刊文化事業,331-337, 454-460。
蔡鴻青(2020),百年企業策略轉折點。台北:早安財經文化。
Akacum, A. & B. G. Dale (1995), “Supplier partnering: Case study experiences,” International Journal of Purchasing and Materials Management, 31(1), 38-44.

Arruñada, Benito & Xosé H. Vázquez (2006), “When your contract manufacture becomes your competitor-best practice, “Harvard Business Review, September, 135-143.

Barney, Jay (1991), “Firm resources and sustained competitive advantage,” Journal of Management, 17(1), 99-120.

Becker, G. S. (1964), Human Capital, New York: Columbia University Press.

Bierly, III E. Paul & Scott Gallagher (2007), “Explaining alliance partner selection: fit, trust and strategic expediency,” Long Range Planning, 40(2), 134-153.

Birou, L. M. & S. E. Fawcett (1993), “International purchasing: benefits, requirements, and challenges,” International Journal of Purchasing & Materials Management, 29(2), 28-37.

Burtonshaw-Gunn, S. A. (2008), The Essential Management Toolbox: Tools, Models and Notes for Managers and Consultants, Chichester, UK: John Wiley & Sons.

Calhoun, Mikelle A. (2002), “Unpacking liability of foreignness: identifying culturally driven external & internal sources of liability for the foreign subsidiary,” Journal of International Management, 8, 301-321.

Cavinato, Joseph L. (2004), “Supply chain logistics risks; from the back room to the board roomInternational Journal of Physical Distribution & Logistics Management, 34(5), 383-387.

Cho, J. & J. Kang (2001), “Benefits and challenges of global sourcing: perceptions of US apparel retail firms,” International Marketing Review, 18(5), 542-561.

Chopra, S. & M. S. Sodhi (2004), “Managing risk to avoid supply-chain breakdown,” MIT Sloan Management Review, 46(1), 53-62.
Cucchiella, Fedrica & Massimo Gastaldi (2006), “Risk management in supply chain: a real option approach,” Journal of Manufacturing Technology Management, 17(6), 700-720.

Chiles, T. H. and J. F. McMackin (1996), “Integrating variable risk preferences, trust, and transaction cost economics," Academy of Management Review, 21(1), 73-99.

Christopher, Martin (1992), Logistic and Supply Chain Management, UK: Pitman Publishing, London.

Christopher, Martin (1992), Logistics: The Strategic Issues, UK: Chapman and Hall London.

Craighead, C. W., Blackhurst, J., Rungtusanatham, J. M. & Robert B. Handfield (2007), “The severity of supply chain disruptions: Design characteristics & mitigation capabilities,” Decision Sciences, 38(1), 131-156.

Christopher, Martin & Helen Peck (2004), “Building the resilient supply chain,” International Journal of Logistics Management, 15(2), 1-13.

Das, T. K. & Bing-Sheng Teng (2000), “A resource-based theory of strategic alliances,” Journal of Management, 26(1), 31–61.

Fisher, Marshall L. (1997), “What is the right supply chain for your product?” Harvard Business Review, March-April, 105-116.

Franceschini, F., Galetto, M., Pignatelli, A. & M. Varetto (2003), “Outsourcing: Guidelines for a structured approach,” Benchmarking: An International Journal, 10(3), 246-260.

Freeman, J., Carroll, G. R. & M. T. Hannan (1983), “The liability of newness: Age dependence in organizational death rates,” American Sociological Review, 48(5), 692-710.

Gandhi, J. S., Gorod, A. & Brian Sauser (2012), “Prioritization of outsourcing risks from a systemic perspective, “ Strategic Outsourcing: An International Journal, 5(1), 39-71.

Ghadge, A., Dani, S., Chester, M. & Roy Kalawsky (2013), “A systems approach for modelling supply chain risks,” Supply Chain Management: An International Journal,18(5), 523–538.

Giunipero, Larry C. & Reham Aly Eltantawy (2004), “Securing the upstream supply chain:a risk management approach,” International Journal of Physical Distribution & Logistic Management, 34 (9), 698-713.

Hanson, Gordon H. (2020), “Who will fill China`s shoes? The global evolution of labor-Intensive manufacturing” National Bureau of Economic Research, working paper, 28313, 1-23.

Heckmann, I., Comes, T. & Stefan Nickel (2015), “A critical review on supply chain risk - Definition, measure and modeling,” Omega, 52, 119–132.

Hoffmann, Werner H. & Roman Schlosser (2001), “Success factors of strategic alliances in small and medium-sized enterprises - An empirical survey,” Long Range Planning, 34, 357-381.

Hult, G. T. M. (1997), “Measuring cycle time of the global procurement process,” Industrial Marketing Management, 26(5), 403-12.

Johnson, M.E. (2001), “Learning from toys: lessons in managing supply chain risk from the toy industry”, California Management Review, 43(3), 106-124.

Juttner, Uta (2005), “Supply chain risk management - Understanding the business requirements from a practitioner perspective,” The International Journal of Logistics Management, 16(1), 120-141.

Juttner, U., Peck, H. & M. Christopher (2003), “Supply chain risk management: outlining an agenda for future research,” International Journal of Logistics Research and Applications, 6(4), 197–210.

Kleindorfer, Paul R. & Germaine H. Saad (2005), “Managing disruption risks in supply chains,” Production & Operations Management, 14(1), 53-68.

Laeequddin, M., Sahay, B. S., Sahay, V. & K. A. Waheed (2010), “Measuring trust in supply chain partner’s relationships,” Measuring Business Excellence, 14(3), 53-69.

Lagadec, Patrick (1993), Preventing Chaos in A Crisis: Strategies for Prevention, Control and Damage Limitation, NY: McGraw-Hill.

Lambert, D. M., Emmelhainz, M. A. & John T. Gardner (1996), “Developing and implementing supply chain partnerships,” The International Journal of Logistics Management, 7(2), 1-17.

Larson, P. & J. Kulchitsky (1998), “Single sourcing and supplier certification: performance and relationship implications,” Industrial Marketing Management, 27(1), 73-81.

Latour, Almar (2001), “Trial by fire: A Blaze in Albuquerque sets off major crisis for cell-phone giants,” The Wall Street Journal, 1A.

Lee, H., Padmanabhan, V. & S. Wang (1997), “Information distortion in a supply chain: the bullwhip effect”, Management Science, 43(4), 546-558.

Li, Xianhong & Ian Barnes (2008), “Proactive supply risk management methods for building a robust supply selection process when sourcing from emerging markets,” Strategic Outsourcing: An International Journal, 1(3), 252-267.

MacKinnon, M. (2002), “The security team: these online services back up B2B security,” Purchasing B2B.

Mandal, Anukul & S.G. Deshmukh (1993), “Vendor selection using interpretive structural modelling (ISM),” International Journal of Operations & Production Management, 14(6), 52-59.

Manuj, Ila & John T. Mentzer (2008), “Global supply chain risk management strategies,” International Journal of Physical Distribution & Logistic Management, 38(3),192-223.

Mason-Jones, R., Naylor, B. & Denis R. Towill (2000), “Lean, agile or leagile? Matching your supply chain to the marketplace,” International Journal of Production Research, 38(17), 4051-4070.

Mayer, Roger C., Davis, James H. & F. David Schoorman (1995), “An integrative model of organizational trust,” Academy of Management Review, 20(3), 709-734.

McCutcheon, David & F. Ian Stuart (2000), “Issues in the choice of supplier alliance partners,” Journal of Operations Management,18, 279-301.

Monczka, R. M., Petersen, K. J., Handfield, R. B. & Gary L. Ragatz (1998), “Success factors in strategic supplier alliances: The buying company perspective,” Decision Sciences, 29(3), 553-557.

Moritz, Brent B. & Christopher W. Craighead (2015), “Ashmark Corporation: Dealing with a supply disruption,” Richard Ivey School of Business Foundation, W15357.

Natarajarathinam, M., Capar, I. & Arunachalam Narayanan (2009), “Managing supply chains in times of crisis: a review of literature and insights,” International Journal of Physical Distribution & Logistics Management, 39(7), 535-573.

Oke, Adegoke & Mohan Gopalakrishnan (2009), “Managing disruptions in supply chains: A case study of a retail supply chain,” International Journal Production Economics, 118, 168-174.

Oliver, R. K. & M. D. Webber (1982), “Supply-chain management: logistics catches up with strategy,” Outlook, 5(1), 42-47.

Olson, David L. & Desheng Dash Wu (2010), “A review of enterprise risk management in supply chain,” Kybernetes, 39(5), 694-706.

Ritchie, B. & C. Brindley (2007), “An emergent framework for supply chain risk management and performance measurement,” Journal of the Operational Research Society, 58, 1398-1411.

Rurach, Cchristian F., Glasen, Patrick C. & Frank Straube (2017), “Disruption causes and disruption management in supply chains with Chinese suppliers - Managing cultural differences,” International Journal of Physical Distribution & Logistics Management, 47(9), 843-863.

Singh, K. (1998), “The impact of technological complexity and interfirm cooperation on business survival,” Academy of Management Journal, 40(2), 339-369.

Sinha, P.R., Whitman, L. E. & D. Malzahn (2004), “Methodology to mitigate supplier risk in an aerospace supply chain,” Supply Chain Management: An International Journal, 9(2), 154-168.

Skipper, Joseph B. & Joe B. Hanna (2009), “Minimizing supply chain disruption risk through enhanced flexibility,” International Journal of Physical Distribution & Logistics Management, 39(5), 404-427.

Sohdi, Manmohan S. & Christopher S. Tang (2012), Managing Supply Chain Risk, International Series in Operations Research & Management Science. NY: Dordrecht Heidelberg London.

Spekman, R. E. & E. W. Davis (2004), “Risky business: expanding the discussion on risk and the extended enterprise,” International Journal of Physical Distribution & Logistics Management, 34(5), 414-433.

Stewart, Gordon (1997), “Supply-chain operations reference model (SCOR): the first cross-industry framework for integrated supply-chain management,” Logistics Information Management, 10(2), 62–67.

Stinchombe, Arthur L. (1965), “Organization and social structure,” In James G. March (ed.), Handbook of Organizations, 153-193. Chicago: Rand-McNally

Tachizawa, E. M. & C. Y. Wong (2014), “Towards a theory of multi-tier sustainable supply chains: a systematic literature review,” Supply Chain Management: An International Journal, 19(5/6), 643-663.

Tomer, J. F. (1987), Organizational Capital: The Path of Higher Productivity and Well-being, New York: Praeger.

Tejpal, G., Garg, R.K. & A. Sachdeva (2013), “Trust among supply chain partners: a review,” Measuring Business Excellence, 17(1), 51-71.

Tomlin, Brian (2006), “On the value of mitigation and contingency strategies for managing supply chain disruption risks,” Management Science, 52(5), 639-657.

Tummala, Rao & Tobias Schoenherr (2011), “Assessing and managing risks using the supply chain risk management process (SCRMP),” Supply Chain Management: An International Journal, 16(6), 474–483.

Wiseman, R.M. & L. R. Gomez-Mejia (1998), “A behavioral agency model of managerial risk taking,” Academy of Management Review, 23(1), 133-155.
Williamson, O. (1975), Market and Hierarchies, NY: Free Press.

Wu, T., Blackhurst, J. & P. O’Frady (2007), “Methodology for supply chain disruption analysis,” International Journal of Production Research, 45(7), 1665-1682.

Yan, Aimin & Barbara Gary (1994), “Bargaining power, management control, and performance in China,” Academy of Management Journal, 37(6), 1478-1517.

Yates, J. F. & E. R. Stone (1992), Risk Appraisal, In J. F. Yates (Ed.), Wiley series in human performance and cognition. Risk-taking Behavior, 49-85. NY: John Wiley & Sons.

Zaheer, Srilata (1995), “Overcoming the liability of foreignness,” Academy of Management Journal, 38(2), 341-363.

Zsidisin, G. A. (2003a), “Managerial perceptions of supply risk,” Journal of Supply Chain Management: A Global Review of Purchasing & Supply, 39(1), 14-23.

Zsidisin, G. A. & L. M. Ellram (2003), “An agency theory investigation of supply risk management,” Journal of Supply Chain Management: A Global Review of Purchasing & Supply, 39(3), 15-27.
zh_TW
dc.identifier.doi (DOI) 10.6814/NCCU202101462en_US