1. NCCU Academic Hub
  2. Publications
  3. College of Commerce
  4. Theses
  5. Item

Publications-Theses

Article View/Open

Publication Export

Google ScholarTM

NCCU Library

Citation Infomation

Related Publications in TAIR

題名 企業破壞式創新程度與績效:台灣資訊電子業之實證研究
Innovation disruptiveness and firm performance:A Study of Taiwan information technology industry
作者 李垂泰
Eric Lee
貢獻者 黃 國 峯
Huang, Kuo Feng
李垂泰
Eric Lee
關鍵詞 破壞式創新
創新策略
企業破壞式創新程度
disruptive innovation
innovation strategy
company`s disruptiveness
日期 2007
上傳時間 8-Dec-2010 13:10:45 (UTC+8)
摘要 摘要
本研究之目的在透過實政研究方法回答兩個關於破壞式創新研究問題，首先，產業延續性創新速度與企業破壞式創新程度之關係為何？其次企業的破壞式創新程度對其績效影響為何？本研究透過文獻探討，設計問卷並以台灣資訊電子產業公開發行之企業進行問卷調查蒐集初級資料。經由統計分析，本研究得出兩重大發現，首先，產業延續性創新速度與企業破壞式創新程度為負相關，而企業對新產品開發專案之決策資訊充足要求程度會弱化此關係。其次，企業規模與財務績效有正相關，而企業破壞式創新程度會強化此關係。
The aim of this research is to answer two research questions about disruptive innovation with empirical methodology. First, what is the relation between industrial sustaining innovation rate and a company`s disruptiveness. Second, does a company’s disruptiveness impact firm financial performance? By collecting primary data, this research developed the questionnaire based on literature review and collected data from the publicly-listed companies in the Taiwan IT industry. With statistic analysis, this research has two significant findings. First, industrial sustaining innovation rate has a negative impact on an incumbent company’s disruptiveness and the accuracy of company investment decision on NPD project will weaken this relation. Second, firm size has a positive impact on firm financial performance and a company`s disruptiveness will strengthen this relationship.
參考文獻 Abernathy, W.J., Clark. K.B., (1985). Mapping the winds of creative destruction. Research Policy, 14, 3–22.
Adner, R., (2002). When are technologies disruptive? A demand-based view of the emergence of competition. Strategic Management Journal, 23,8, 667–688.
Alexander, S.S., (1949). The effecs of size of manufacturing corporation on the distribution of rate of return. Review of Economics, Nov., 229-235.
Amato, L., and Wilder, R.P. (1985). The effects of firm size on profit rates in U.S. manufacturing. South. Econ. J., 52(J), 181-190.
Assink, M., (2006), Inhibitors of disruptive innovation capability: a conceptual model. European Journal of Innovation, Vol.9, Iss. 2, 215-234.
Baumol, W., (1967). Business behavior value and growth, New York, Harcourt Brace Jovanovich.
Betz, F. (1991). Next-Generation Technology and Research Consortia. International Journal of Technology Management, special issue, 298-310.
Betz, F. (2003). Managing Technological Innovation. Wiley, 2003.
Charitou, C.D., and Markides, C.C. (2003). Responses to Disruptive Strategic Innovation. MIT Sloan Management Review, 44(2), 55-63.
Christensen, C.M., (1992). Exploring the limits of the technology S-Curve. Part I：Component Technologies. Production and Operations Management, Vol. 1, No. 4, Fall 1992, 334-357.
Christensen, C.M. (1997). The Innovator’s Dilemma. When New Technologies Cause Great Firms to Fail. Harvard Business School Press, Boston, MA..
Christensen, C.M., and Bower, J.L., (1996). Customer Power, Strategic Investment, and the Failure of Leading Firms. Strategic Management Journal, 17(3), 197-218.
Christensen, C.M.,. Raynor, M.E. (2003). The innovators’solution. Creating and Sustaining Successful Growth. Harvard Business School Press, Boston, MA..
Coe, J.T. (1986). Measuring the success of R&D Innovations. National Productivity Review, Summer 1982, 330-335.
Cooper, D.R., and Schindler, P.S., (2003). Business research methods 8th , McGrawHill.
Danneels, E., (2004). Disruptive technology reconsidered: a critique and research agenda. Journal of Product Innovation Management, Vol. 21, 246-258
Denning, S., (2005). Why the best and brightest approaches don’t solve the innovation dilemma. Strategy&Leadership, Vol. 33, Iss. 1, 4-12.
Garcia, R., and Calantone, R. (2001). A critical look at technological innovation typology and innovativeness terminology：a literature review. The Journal of Produt Innovation Management, Vol. 19, 110-132.
Ghemawat, P. (1991). Commiment. Havard Business School.
Gilbert, C. (2003). The disruption opportunity. Sloan Management Review, 44(4), 27-32.
Govindarajan, V., and Kopalle, PK. (2006). Disruptiveness of innovations：Measurement and an assessment of reliability and validity. Strategy Management Journal, Vol. 27, 189-199.
Griffin, A. (1997). PDMA research on new product development practices: updating trends and benchmarking best practices. Journal of Product Innovation Management, Vol. 14, No. 6, 429-59.
Hall, M., and Weiss, L. (1967). Firm size and profitability. Review of Economics and Statistics, 319-331.
Heany, D.F. (1983). The degrees of product innovation. Journal of Business Strategy, Spr. 83, Vol. 3, Iss. 4, 3-14.
Jeffrey, P., and Gerald, R.S. (1978). The external control of organizations. Harper&Row, New York.
Joseph, F.H., William, C.B., Barry, J.B., Rolph, E.A., and Ronald, L.T. (2006). Multivariate Data Analysis. Prentice Hall.
Kim, L. (1986). Invasion of a stable business by radical innovation. P.R. Kleindorfer, ed. The Management of Productivity and Technology in Manufacturing. Plenum Press, New York.
Lin, R. (2006). Multivariate Analysis─SPSS Operation and Application. Best-Wise Press.
Linder, J.C. (2006). Does innovation drive profitable growth？New metrics for a complete picture. The Journal of Business Strategy, Vol. 27, Iss. 5, 38.
Marquis, D.G. (1960). The Anatomy of Successful Innovations. Innovation, November. Reprinted in Readings in the Management of Innovation, Tushman M.L., Morres, W.L., and Pitman, E.D. Marshfield, MA, 1982.
Miller, D. (1990). The Icarus Paradox. New York Harper Business.
Montoya-Weiss, M.M., and Calantone, R.J. (1994). Determinants of new product performance：a review and meta-analysis. Journal of Product Innovation Management, Vol. 11, 397-417.
Rafael, L., Ricardo, C., and Joaquin, A. (2006). A measurement scale for product innovation performance. European Journal of Innovation, Vol. 9, Iss. 4, 333-346.
Sahal, D. (1981). Patterns of Technological Innovation. Addison-Wesley, London.
Salavou, H. (2002). Profitability in market-oriented SMEs：does product innovation matter. European Journal of Innovation Management, 5(3), 164-171.
Shapiro, A.R. (2006). Measuring Innovation：Beyond revenue from new products. Research Technology Management, Vol. 49, Iss. 6, 42-51.
Souder, W., and Sherman, J. (1994). Managing New Technology Development. McGraw-Hill, New York.
Starbuck, W.H. (1988). Why organizations run into crises…and sometimes survive them. K. Laudon, J. Turner, eds. Information Technology and Management Strategy. Prentice Hall, Englewood Cliffs, NJ, 11-33.
Steindl, J. (1945). Small and Big Business:Economic Problems of the Size of Firms. Oxford University Press, London.
Stekler, H.O. (1964). The variability of profitability with size of firms. Journal of the American Statistical Association. Dec., 1183-93.
Tidd, J., Bessant, J., and Pavitt, k. (2003). Managing Innovation. Wiley.
Thor, C.G., (1991). Performance measurement in a research organization. National Productivity Review.
Wen, Z., and Bullard, S.H. (2008). Firm size and competitive advantage in the U.S. upholstered, wood household furniture industry. Forest Products Journal, Vol. 58, No. 1/2, 91-96.
Wheelwright, S.C., and Clark, K.N., (1992). Revolutionizing product development─Quantum leas in speed, efficiency, and quality. The Free Press, New York.
Wheelwright, S.C., and Clark, K.N. (1992). Organizing and leading heavyweight development teams. California Management Review, Spr. 34, Iss. 3, 9-28.
Zahra, S.A., and Das, S.R. (1993). Innovation strategy and financial performance in manufacturing companies：an empirical study. Product and Operations Management, Vol. 2, No. 1, 90-101.
描述 碩士
國立政治大學
企業管理研究所
95355013
96
資料來源 http://thesis.lib.nccu.edu.tw/record/#G0095355013
資料類型 thesis
dc.contributor.advisor 黃 國 峯zh_TW
dc.contributor.advisor Huang, Kuo Fengen_US
dc.contributor.author (Authors) 李垂泰zh_TW
dc.contributor.author (Authors) Eric Leeen_US
dc.creator (作者) 李垂泰zh_TW
dc.creator (作者) Eric Leeen_US
dc.date (日期) 2007en_US
dc.date.accessioned 8-Dec-2010 13:10:45 (UTC+8)-
dc.date.available 8-Dec-2010 13:10:45 (UTC+8)-
dc.date.issued (上傳時間) 8-Dec-2010 13:10:45 (UTC+8)-
dc.identifier (Other Identifiers) G0095355013en_US
dc.identifier.uri (URI) http://nccur.lib.nccu.edu.tw/handle/140.119/49523-
dc.description (描述) 碩士zh_TW
dc.description (描述) 國立政治大學zh_TW
dc.description (描述) 企業管理研究所zh_TW
dc.description (描述) 95355013zh_TW
dc.description (描述) 96zh_TW
dc.description.abstract (摘要) 摘要
本研究之目的在透過實政研究方法回答兩個關於破壞式創新研究問題，首先，產業延續性創新速度與企業破壞式創新程度之關係為何？其次企業的破壞式創新程度對其績效影響為何？本研究透過文獻探討，設計問卷並以台灣資訊電子產業公開發行之企業進行問卷調查蒐集初級資料。經由統計分析，本研究得出兩重大發現，首先，產業延續性創新速度與企業破壞式創新程度為負相關，而企業對新產品開發專案之決策資訊充足要求程度會弱化此關係。其次，企業規模與財務績效有正相關，而企業破壞式創新程度會強化此關係。		zh_TW
dc.description.abstract (摘要) The aim of this research is to answer two research questions about disruptive innovation with empirical methodology. First, what is the relation between industrial sustaining innovation rate and a company`s disruptiveness. Second, does a company’s disruptiveness impact firm financial performance? By collecting primary data, this research developed the questionnaire based on literature review and collected data from the publicly-listed companies in the Taiwan IT industry. With statistic analysis, this research has two significant findings. First, industrial sustaining innovation rate has a negative impact on an incumbent company’s disruptiveness and the accuracy of company investment decision on NPD project will weaken this relation. Second, firm size has a positive impact on firm financial performance and a company`s disruptiveness will strengthen this relationship.en_US
dc.description.tableofcontents Content 1
Figure 3
Table 4
Chapter 1 Introduction 5
1.1 Background 5
1.2 Research Purpose 5
1.3 Research Process 6
1.4 Thesis Structure 9
Chapter 2 Literature Review 11
2.1 Types of Innovation 11
2.2 Factors of Company’s Disruptiveness 19
2.3 Firm Size, Company’s Disruptiveness and Performance 31
2.4 Research Structure 37
Chapter 3：Research Methodology 39
3.1 Sample Firm Selection 39
3.2 Data Collection 40
3.3 Working Definition and Research Variable Measurement 40
3.4 Analysis Techniques 45
3.5 Questionnaire Survey 47
Chapter 4 Results and Analysis 50
4.1 Descriptive Statistics and Analysis of Correlation 50
4.2 Regression Analysis 55
4.3 Discussion 59
Chapter 5 Conclusion and Suggestion 63
5.1 Contributions 63
5.2 Implications 64
5.3 Research limitation 66
Reference 68


Figure

Figure 1. 1 Research Process 8
Figure 2.1 Low-end Disruptive Innovation Model 21
Figure 2.2 The Third Dimension of Disruptive Innovation Model 22
Figure 2.3 Industrial sustaining innovation rate and company sustaining innovation rate 27
Figure 2.4 The accuracy of company investment decision on NPD project 30
Figure 2.5 Research Structure 38
Figure 3.1 Questionnaire Design Process 48
Figure 4.1 The moderating effect of the accuracy of company investment decision on NPD project on the relationship between industrial sustaining innovation rate and company`s disruptiveness. 57
Figure 4.2 The moderating effect of company`s disruptiveness on the relationship between firm size and major product revenue. 58


Table

Table 2.1 The spectrum of product innovation 15
Table 2.2 Definitions of Innovation Typology 18
Table 2.3 Measurement Instruments of Innovation Performance 34
Table 4.1 Background of Respondents 1 (Variables: DRT, ISIR, IDA) 51
Table 4.2 Background of Respondents 2 (Variables: DRT, FS, Performance) 52
Table 4.3 Factor Analysis 53
Table 4.4 Descriptive Statistics and Correlations 1 (variables ISIR, DRT, IDA) 54
Table 4.5 Descriptive Statistics and Correlations 2(variables DRT, FS, Performance) 55
Table 4.6 Regression Results 1 (Beta Coefficients) 56
Table 4.7 Regression Results 2 (Beta Coefficients) 58
Table 4.8 Hypotheses and Statistic Analyses Results 59		zh_TW
dc.format.extent 47606 bytes-
dc.format.extent 15006 bytes-
dc.format.extent 40681 bytes-
dc.format.extent 43623 bytes-
dc.format.extent 160774 bytes-
dc.format.extent 50599 bytes-
dc.format.extent 119918 bytes-
dc.format.extent 20513 bytes-
dc.format.extent 39167 bytes-
dc.format.extent 131116 bytes-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.format.mimetype application/pdf-
dc.language.iso en_US-
dc.source.uri (資料來源) http://thesis.lib.nccu.edu.tw/record/#G0095355013en_US
dc.subject (關鍵詞) 破壞式創新zh_TW
dc.subject (關鍵詞) 創新策略zh_TW
dc.subject (關鍵詞) 企業破壞式創新程度zh_TW
dc.subject (關鍵詞) disruptive innovationen_US
dc.subject (關鍵詞) innovation strategyen_US
dc.subject (關鍵詞) company`s disruptivenessen_US
dc.title (題名) 企業破壞式創新程度與績效:台灣資訊電子業之實證研究zh_TW
dc.title (題名) Innovation disruptiveness and firm performance:A Study of Taiwan information technology industryen_US
dc.type (資料類型) thesisen
dc.relation.reference (參考文獻) Abernathy, W.J., Clark. K.B., (1985). Mapping the winds of creative destruction. Research Policy, 14, 3–22.zh_TW
dc.relation.reference (參考文獻) Adner, R., (2002). When are technologies disruptive? A demand-based view of the emergence of competition. Strategic Management Journal, 23,8, 667–688.zh_TW
dc.relation.reference (參考文獻) Alexander, S.S., (1949). The effecs of size of manufacturing corporation on the distribution of rate of return. Review of Economics, Nov., 229-235.zh_TW
dc.relation.reference (參考文獻) Amato, L., and Wilder, R.P. (1985). The effects of firm size on profit rates in U.S. manufacturing. South. Econ. J., 52(J), 181-190.zh_TW
dc.relation.reference (參考文獻) Assink, M., (2006), Inhibitors of disruptive innovation capability: a conceptual model. European Journal of Innovation, Vol.9, Iss. 2, 215-234.zh_TW
dc.relation.reference (參考文獻) Baumol, W., (1967). Business behavior value and growth, New York, Harcourt Brace Jovanovich.zh_TW
dc.relation.reference (參考文獻) Betz, F. (1991). Next-Generation Technology and Research Consortia. International Journal of Technology Management, special issue, 298-310.zh_TW
dc.relation.reference (參考文獻) Betz, F. (2003). Managing Technological Innovation. Wiley, 2003.zh_TW
dc.relation.reference (參考文獻) Charitou, C.D., and Markides, C.C. (2003). Responses to Disruptive Strategic Innovation. MIT Sloan Management Review, 44(2), 55-63.zh_TW
dc.relation.reference (參考文獻) Christensen, C.M., (1992). Exploring the limits of the technology S-Curve. Part I：Component Technologies. Production and Operations Management, Vol. 1, No. 4, Fall 1992, 334-357.zh_TW
dc.relation.reference (參考文獻) Christensen, C.M. (1997). The Innovator’s Dilemma. When New Technologies Cause Great Firms to Fail. Harvard Business School Press, Boston, MA..zh_TW
dc.relation.reference (參考文獻) Christensen, C.M., and Bower, J.L., (1996). Customer Power, Strategic Investment, and the Failure of Leading Firms. Strategic Management Journal, 17(3), 197-218.zh_TW
dc.relation.reference (參考文獻) Christensen, C.M.,. Raynor, M.E. (2003). The innovators’solution. Creating and Sustaining Successful Growth. Harvard Business School Press, Boston, MA..zh_TW
dc.relation.reference (參考文獻) Coe, J.T. (1986). Measuring the success of R&D Innovations. National Productivity Review, Summer 1982, 330-335.zh_TW
dc.relation.reference (參考文獻) Cooper, D.R., and Schindler, P.S., (2003). Business research methods 8th , McGrawHill.zh_TW
dc.relation.reference (參考文獻) Danneels, E., (2004). Disruptive technology reconsidered: a critique and research agenda. Journal of Product Innovation Management, Vol. 21, 246-258zh_TW
dc.relation.reference (參考文獻) Denning, S., (2005). Why the best and brightest approaches don’t solve the innovation dilemma. Strategy&Leadership, Vol. 33, Iss. 1, 4-12.zh_TW
dc.relation.reference (參考文獻) Garcia, R., and Calantone, R. (2001). A critical look at technological innovation typology and innovativeness terminology：a literature review. The Journal of Produt Innovation Management, Vol. 19, 110-132.zh_TW
dc.relation.reference (參考文獻) Ghemawat, P. (1991). Commiment. Havard Business School.zh_TW
dc.relation.reference (參考文獻) Gilbert, C. (2003). The disruption opportunity. Sloan Management Review, 44(4), 27-32.zh_TW
dc.relation.reference (參考文獻) Govindarajan, V., and Kopalle, PK. (2006). Disruptiveness of innovations：Measurement and an assessment of reliability and validity. Strategy Management Journal, Vol. 27, 189-199.zh_TW
dc.relation.reference (參考文獻) Griffin, A. (1997). PDMA research on new product development practices: updating trends and benchmarking best practices. Journal of Product Innovation Management, Vol. 14, No. 6, 429-59.zh_TW
dc.relation.reference (參考文獻) Hall, M., and Weiss, L. (1967). Firm size and profitability. Review of Economics and Statistics, 319-331.zh_TW
dc.relation.reference (參考文獻) Heany, D.F. (1983). The degrees of product innovation. Journal of Business Strategy, Spr. 83, Vol. 3, Iss. 4, 3-14.zh_TW
dc.relation.reference (參考文獻) Jeffrey, P., and Gerald, R.S. (1978). The external control of organizations. Harper&Row, New York.zh_TW
dc.relation.reference (參考文獻) Joseph, F.H., William, C.B., Barry, J.B., Rolph, E.A., and Ronald, L.T. (2006). Multivariate Data Analysis. Prentice Hall.zh_TW
dc.relation.reference (參考文獻) Kim, L. (1986). Invasion of a stable business by radical innovation. P.R. Kleindorfer, ed. The Management of Productivity and Technology in Manufacturing. Plenum Press, New York.zh_TW
dc.relation.reference (參考文獻) Lin, R. (2006). Multivariate Analysis─SPSS Operation and Application. Best-Wise Press.zh_TW
dc.relation.reference (參考文獻) Linder, J.C. (2006). Does innovation drive profitable growth？New metrics for a complete picture. The Journal of Business Strategy, Vol. 27, Iss. 5, 38.zh_TW
dc.relation.reference (參考文獻) Marquis, D.G. (1960). The Anatomy of Successful Innovations. Innovation, November. Reprinted in Readings in the Management of Innovation, Tushman M.L., Morres, W.L., and Pitman, E.D. Marshfield, MA, 1982.zh_TW
dc.relation.reference (參考文獻) Miller, D. (1990). The Icarus Paradox. New York Harper Business.zh_TW
dc.relation.reference (參考文獻) Montoya-Weiss, M.M., and Calantone, R.J. (1994). Determinants of new product performance：a review and meta-analysis. Journal of Product Innovation Management, Vol. 11, 397-417.zh_TW
dc.relation.reference (參考文獻) Rafael, L., Ricardo, C., and Joaquin, A. (2006). A measurement scale for product innovation performance. European Journal of Innovation, Vol. 9, Iss. 4, 333-346.zh_TW
dc.relation.reference (參考文獻) Sahal, D. (1981). Patterns of Technological Innovation. Addison-Wesley, London.zh_TW
dc.relation.reference (參考文獻) Salavou, H. (2002). Profitability in market-oriented SMEs：does product innovation matter. European Journal of Innovation Management, 5(3), 164-171.zh_TW
dc.relation.reference (參考文獻) Shapiro, A.R. (2006). Measuring Innovation：Beyond revenue from new products. Research Technology Management, Vol. 49, Iss. 6, 42-51.zh_TW
dc.relation.reference (參考文獻) Souder, W., and Sherman, J. (1994). Managing New Technology Development. McGraw-Hill, New York.zh_TW
dc.relation.reference (參考文獻) Starbuck, W.H. (1988). Why organizations run into crises…and sometimes survive them. K. Laudon, J. Turner, eds. Information Technology and Management Strategy. Prentice Hall, Englewood Cliffs, NJ, 11-33.zh_TW
dc.relation.reference (參考文獻) Steindl, J. (1945). Small and Big Business:Economic Problems of the Size of Firms. Oxford University Press, London.zh_TW
dc.relation.reference (參考文獻) Stekler, H.O. (1964). The variability of profitability with size of firms. Journal of the American Statistical Association. Dec., 1183-93.zh_TW
dc.relation.reference (參考文獻) Tidd, J., Bessant, J., and Pavitt, k. (2003). Managing Innovation. Wiley.zh_TW
dc.relation.reference (參考文獻) Thor, C.G., (1991). Performance measurement in a research organization. National Productivity Review.zh_TW
dc.relation.reference (參考文獻) Wen, Z., and Bullard, S.H. (2008). Firm size and competitive advantage in the U.S. upholstered, wood household furniture industry. Forest Products Journal, Vol. 58, No. 1/2, 91-96.zh_TW
dc.relation.reference (參考文獻) Wheelwright, S.C., and Clark, K.N., (1992). Revolutionizing product development─Quantum leas in speed, efficiency, and quality. The Free Press, New York.zh_TW
dc.relation.reference (參考文獻) Wheelwright, S.C., and Clark, K.N. (1992). Organizing and leading heavyweight development teams. California Management Review, Spr. 34, Iss. 3, 9-28.zh_TW
dc.relation.reference (參考文獻) Zahra, S.A., and Das, S.R. (1993). Innovation strategy and financial performance in manufacturing companies：an empirical study. Product and Operations Management, Vol. 2, No. 1, 90-101.zh_TW