1. NCCU Academic Hub
  2. Publications
  3. College of Commerce
  4. Theses
  5. Item

Publications-Theses

Article View/Open

Publication Export

Google ScholarTM

NCCU Library

Citation Infomation

Related Publications in TAIR

題名 量測誤差對Ｘ－Ｓ2管制圖設計參數之影響
作者 郭又升
Kuo, Yu-Sheng
貢獻者 楊素芬
Yang, Su-Fen
郭又升
Kuo, Yu-Sheng
關鍵詞 管制圖
量測誤差
更新理論
control chart
measurement error
renewal theory
日期 2000
上傳時間 31-Mar-2016 14:44:40 (UTC+8)
摘要 隨著經濟不斷的發展，企業間的競爭也愈趨激烈，因此在以利潤最大、付出成本最小的前提下，一些可能造成成本增加的因素就不能不重視。在量測產品的特性所使用的量測機器，可能因為量測設備的不精確造成誤差，進而影響測量產品品質特性的實際值。是以量測儀器測量產品特性時的誤差對於管制圖的設計參數的影響及使用管制圖監控製程的能力是我們所關切的課題。
參考文獻 1. 林英峰(1990)，現代生產與作業管理-第四版.\n2. Nigel Slack, Stuart Chambers, Christine Harland, Alan Harrison, Robert Johnston/著，李茂興、黃敏裕、蔡宏明/譯(1998)，生產與作業管理.\n3. 楊俊輝 (1992), "在非常態與測量誤差下 管制圖之經濟模式：敏感度分析.", 國立台灣工業技術學院工程技術研究所工業管理技術學程碩士學位論文.\n4. Alt, F. (1981), "One Control Chart for the Mean and Variance.", Proceeding of Industrial Engineering Conference, Washington , D.C., pp.143-145.\n5. Banerjee, P., and Rahim, M. (1987), "The Economic Design of Control Charts: A Renewal Theory Approach.", Engineering Optimization, 12 pp.63-73.\n6. Besterfiel, D. (1979), Quality Control, Prentice-Hall, Englewood Cliffs, NJ.\n7. Collani, V. and Sheil, J. (1989), "An Approach to Controlling Process Variability", Journal of Quality Technology, Vol. 24 No. 2, April, pp.87-96.\n8. Crosby, P. B. (1984), Quality Without Tears: The Art of Hasslefree Management, Mcgraw-Hill, New York.\n9. Deming, W. E. (1982), Quality Productivity and Competitive Position, Cambridge, M.E:MIT, Center for Advanced Engineering Study.\n10. Duncan, A. (1956), "The Economic Design of Chart Used to Maintain Current Control of a Process.", Journal of the American Statistical Association, 51 pp.228-242.\n11. Duncan, A. (1974), Quality Control and Industrial Statistics, Richard D. Irwin, Homewood, IL.\n12. Jones, L. and Case, K. (1981), "Economic Design of and - and R- Chart", AIIE Transactions, 13, pp.182-195.\n13. Juran, J. M. (1989), Juran on Leadership for Quality, Maxwell Macmillan International, New York.\n14. Kanazuka, T. (1986), "The Effect of Measurement Error on the Power of -R Charts.", Journal of Quality Technology, 18 pp.91-95.\n15. Koo, T. and Lim, L. (1992), "Economic Design of X-bar Chart When Taguchi`s Loss Function is Considered.", Proceedings of Asian Quality Control Symposium, South Korea, pp.166-178.\n16. Panagos, M. R., Heikes, R. G., and Montgomery, D.C. (1985), "Economic Design of Control Charts for Two Manufacturing Process Models.", Naval Research Logistics Quarterly, 32 pp.6321-646.\n17. Rahim, M. (1985), "Economic Model of -Charts under Non-normality and Measurement Errors.", Comput. & Ops. Res. ,Vol.12, No.3, pp.291-299.\n18. Rahim, M., Lashkari, R., and Banerjee, P. (1988), "Joint Economic Design of Mean and Variance Control Charts.", Engineering Optimization, 14 pp.65-78.\n19. Rahim, M. (1989), "Determination of Optimal Design Parameters of Joint and R Charts.", Journal of Quality Technology, 21 pp.65-70.\n20. Saniga, E. (1979), "Joint Economically Optimal Design of and R Control Charts.", Management Science, 24 pp.420-431.\n21. Saniga, E. and Montgomery, D. (1981), "Economically Quality Control Policies for a Single Cause", AIIE Transactions, 13, pp.258-264.\n22. Tagaras, G. (1989), "Economic Charts with Asymmetric Control Limits.", Journal of Quality Technology, 21 pp.147-154.\n23. Taguchi, G., Elsayed, E. and Hsiang, T. (1989), Quality Engineering in Producation Systems, McGraw-Hill, New York, NY.\n24. Yang, S. (1997), "An Optimal Design of Joint and S Control Charts uning Quadratic Loss Function." International Journal of Quality & Reliability Management, Vol.14, No.9, pp.948-966.\n25. Yang, S. (1993), "Economic Design of Joint and R Control Charts: A Markov Chain Method", Journal of National Cheng-Chi University, Vol. 66, No.2, pp.445-494.
描述 碩士
國立政治大學
統計學系
87354001
資料來源 http://thesis.lib.nccu.edu.tw/record/#A2002001937
資料類型 thesis
dc.contributor.advisor 楊素芬zh_TW
dc.contributor.advisor Yang, Su-Fenen_US
dc.contributor.author (Authors) 郭又升zh_TW
dc.contributor.author (Authors) Kuo, Yu-Shengen_US
dc.creator (作者) 郭又升zh_TW
dc.creator (作者) Kuo, Yu-Shengen_US
dc.date (日期) 2000en_US
dc.date.accessioned 31-Mar-2016 14:44:40 (UTC+8)-
dc.date.available 31-Mar-2016 14:44:40 (UTC+8)-
dc.date.issued (上傳時間) 31-Mar-2016 14:44:40 (UTC+8)-
dc.identifier (Other Identifiers) A2002001937en_US
dc.identifier.uri (URI) https://ah.lib.nccu.edu.tw/item?item_id=92742-
dc.description (描述) 碩士zh_TW
dc.description (描述) 國立政治大學zh_TW
dc.description (描述) 統計學系zh_TW
dc.description (描述) 87354001zh_TW
dc.description.abstract (摘要) 隨著經濟不斷的發展，企業間的競爭也愈趨激烈，因此在以利潤最大、付出成本最小的前提下，一些可能造成成本增加的因素就不能不重視。在量測產品的特性所使用的量測機器，可能因為量測設備的不精確造成誤差，進而影響測量產品品質特性的實際值。是以量測儀器測量產品特性時的誤差對於管制圖的設計參數的影響及使用管制圖監控製程的能力是我們所關切的課題。zh_TW
dc.description.tableofcontents 封面頁\n證明書\n致謝詞\n論文摘要\n目錄\n表目錄\n圖目錄\n壹、緒論\n一、前言\n二、文獻回顧\n三、研究動機\n四、研究目的與研究方法\n貳、製程模式之建立\n一、製程的假設\n二、符號定義\n三、製程狀態之定義及其發生的機率\n四、期望循環時間之推導\n五、期望循環成本之推導\n六、目標函數之推導\n參、資料分析\n一、最佳設計參數的獲得\n二、舉例說明和經濟管制圖的應用\n三、敏感度分析\n四、管制圖之經濟設計與經濟統計設計之比較\n肆、結論與建議\n伍、參考文獻\n陸、附錄\n附錄 (1)\n附錄 (2)\n附錄 (3)\n附錄 (4)\n附錄 (5)\n附錄 (6)\n附錄 (7)\n附錄 (8)\n程式\n程式(一)(經濟設計管制圖)\n程式(二)(經濟統計設計管制圖)zh_TW
dc.source.uri (資料來源) http://thesis.lib.nccu.edu.tw/record/#A2002001937en_US
dc.subject (關鍵詞) 管制圖zh_TW
dc.subject (關鍵詞) 量測誤差zh_TW
dc.subject (關鍵詞) 更新理論zh_TW
dc.subject (關鍵詞) control charten_US
dc.subject (關鍵詞) measurement erroren_US
dc.subject (關鍵詞) renewal theoryen_US
dc.title (題名) 量測誤差對Ｘ－Ｓ2管制圖設計參數之影響zh_TW
dc.type (資料類型) thesisen_US
dc.relation.reference (參考文獻) 1. 林英峰(1990)，現代生產與作業管理-第四版.\n2. Nigel Slack, Stuart Chambers, Christine Harland, Alan Harrison, Robert Johnston/著，李茂興、黃敏裕、蔡宏明/譯(1998)，生產與作業管理.\n3. 楊俊輝 (1992), "在非常態與測量誤差下 管制圖之經濟模式：敏感度分析.", 國立台灣工業技術學院工程技術研究所工業管理技術學程碩士學位論文.\n4. Alt, F. (1981), "One Control Chart for the Mean and Variance.", Proceeding of Industrial Engineering Conference, Washington , D.C., pp.143-145.\n5. Banerjee, P., and Rahim, M. (1987), "The Economic Design of Control Charts: A Renewal Theory Approach.", Engineering Optimization, 12 pp.63-73.\n6. Besterfiel, D. (1979), Quality Control, Prentice-Hall, Englewood Cliffs, NJ.\n7. Collani, V. and Sheil, J. (1989), "An Approach to Controlling Process Variability", Journal of Quality Technology, Vol. 24 No. 2, April, pp.87-96.\n8. Crosby, P. B. (1984), Quality Without Tears: The Art of Hasslefree Management, Mcgraw-Hill, New York.\n9. Deming, W. E. (1982), Quality Productivity and Competitive Position, Cambridge, M.E:MIT, Center for Advanced Engineering Study.\n10. Duncan, A. (1956), "The Economic Design of Chart Used to Maintain Current Control of a Process.", Journal of the American Statistical Association, 51 pp.228-242.\n11. Duncan, A. (1974), Quality Control and Industrial Statistics, Richard D. Irwin, Homewood, IL.\n12. Jones, L. and Case, K. (1981), "Economic Design of and - and R- Chart", AIIE Transactions, 13, pp.182-195.\n13. Juran, J. M. (1989), Juran on Leadership for Quality, Maxwell Macmillan International, New York.\n14. Kanazuka, T. (1986), "The Effect of Measurement Error on the Power of -R Charts.", Journal of Quality Technology, 18 pp.91-95.\n15. Koo, T. and Lim, L. (1992), "Economic Design of X-bar Chart When Taguchi`s Loss Function is Considered.", Proceedings of Asian Quality Control Symposium, South Korea, pp.166-178.\n16. Panagos, M. R., Heikes, R. G., and Montgomery, D.C. (1985), "Economic Design of Control Charts for Two Manufacturing Process Models.", Naval Research Logistics Quarterly, 32 pp.6321-646.\n17. Rahim, M. (1985), "Economic Model of -Charts under Non-normality and Measurement Errors.", Comput. & Ops. Res. ,Vol.12, No.3, pp.291-299.\n18. Rahim, M., Lashkari, R., and Banerjee, P. (1988), "Joint Economic Design of Mean and Variance Control Charts.", Engineering Optimization, 14 pp.65-78.\n19. Rahim, M. (1989), "Determination of Optimal Design Parameters of Joint and R Charts.", Journal of Quality Technology, 21 pp.65-70.\n20. Saniga, E. (1979), "Joint Economically Optimal Design of and R Control Charts.", Management Science, 24 pp.420-431.\n21. Saniga, E. and Montgomery, D. (1981), "Economically Quality Control Policies for a Single Cause", AIIE Transactions, 13, pp.258-264.\n22. Tagaras, G. (1989), "Economic Charts with Asymmetric Control Limits.", Journal of Quality Technology, 21 pp.147-154.\n23. Taguchi, G., Elsayed, E. and Hsiang, T. (1989), Quality Engineering in Producation Systems, McGraw-Hill, New York, NY.\n24. Yang, S. (1997), "An Optimal Design of Joint and S Control Charts uning Quadratic Loss Function." International Journal of Quality & Reliability Management, Vol.14, No.9, pp.948-966.\n25. Yang, S. (1993), "Economic Design of Joint and R Control Charts: A Markov Chain Method", Journal of National Cheng-Chi University, Vol. 66, No.2, pp.445-494.zh_TW