學術產出-Theses
Article View/Open
Publication Export
-
題名 S管制圖之經濟設計:更新理論方法
Economic Design of S Control Chart : A Renewal Theory Approach作者 鄭明芳
Jeng, Ming Fang貢獻者 楊素芬
Yang, Su Fen
鄭明芳
Jeng, Ming Fang關鍵詞 S 經濟管制圖
非隨機因素
更新理論
Economic S Control Chart
Assignable Causes
Renewal Theory日期 1994
1993上傳時間 29-Apr-2016 15:30:50 (UTC+8) 摘要 管制圖設計的經濟模式在最近三十年已經被廣泛的研究。本研究利用更新 參考文獻 [1]Alt, F.(1981), “One Control Chart for the Mean and Variance”, Proceeding of Industrial Engineering Conference, Washington, D. C. pp143-145. [2]Banerjee, P. and Rahim, M. (1987), “ The Economic Design of Control Charts : A Renewal Theory Approach” , Engineering Optimization, Vol. 12, pp63-73. [3]Besterfield, D. (1979), Quality Control, Prentice-Hall, Englewood Cliffs, N. J. [4]Chung, K. and Chen, S. (1992), “ Joint Economically Optimal Design of X and S2 Control Charts”, Engineering Optimization, Vol. 19, pp101-113. [5]Collani, V. and Sheil, J. (1989), “An Approach to Controlling Process Variability”, Journal of Quality Technology, Vol. 21, no.2, April, pp87-96. [6]Duncan, A. (1956), “ The Economic Design of X chart Used to Maintain Current Control of a Process”, Journal of the American Statistical Association, Vol. 51, pp228-242. [7]Duncan, A. (1971), “The Economic Design of X Charts When There is a Multiplicity of Assignable Causes”, Journal of the American Statistical Association, Vol. 66, no.33, pp107-121. [8]Duncan, A. (1974), Quality Control and Industrial Statistics, Richard D. Irwin. Inc [9]Gitlow, H., Gitlow, S., Oppenheim ,A. and Oppenheim ,R.,(1989), Tools and Methods for the Improvement of Qualitv, Richard D. Irwin,Inc. [10]IMSL Library (1989) , User’s Manual Math/Library, Fortran Subroutines, IMSL, Inc. [11]Juran, J. (1979), Quality Control Handbook, McGraw-Hill, Inc. [12]Montgomery, D. (1980), “The Economic Design of Control Charts : A Review and Literature Survey”, Journal of Quality Technology, Vol.12,NO.2, April, pp75-86. [13]Moen, R., Nolan, T. ,and Provost, L.(1991), Improving Quality Through Planned Experimentation, McGraw-Hill,Inc. [14]Panagos, M. ,Russell, H. and Montgomery, D. (1985),” Economic Design of X Charts: For Two Manufacturing Models” , Naval Research LogisticsQuarterly, Vol. 32. pp631-646. [15]Rahim, M., Lashkari, R. and Banerjee, P. (1988).” Joint Economic Design of Mean and Variance Control Charts”, Engineering Optimization, 14, pp65-78. [16]Ross, S. (1989), Introduction to Probability Models, Academic Press. [17]Saniga, E. (1979), “Joint Economically Optimal Design of X and R Control Charts”, Management Science, Vol. 24, No.4, pp420-431. [18]Spanos, C. (1992), “Statistical Process Control in semiconductor Manufacturing”,Proceeding of IEEE, June. [19]Shewhart W. (1931), Economic Control of Quality of Manufactured Product, D. Van Nostrand Company, Inc. [20]Yang, S. (1993).”Economic Design of Joint X and R Control Charts : A Markov Chain Method”, JNCU, Vol. 66, No.2, pp445-494. 描述 碩士
國立政治大學
統計學系
81354006資料來源 http://thesis.lib.nccu.edu.tw/record/#B2002003821 資料類型 thesis dc.contributor.advisor 楊素芬 zh_TW dc.contributor.advisor Yang, Su Fen en_US dc.contributor.author (Authors) 鄭明芳 zh_TW dc.contributor.author (Authors) Jeng, Ming Fang en_US dc.creator (作者) 鄭明芳 zh_TW dc.creator (作者) Jeng, Ming Fang en_US dc.date (日期) 1994 en_US dc.date (日期) 1993 en_US dc.date.accessioned 29-Apr-2016 15:30:50 (UTC+8) - dc.date.available 29-Apr-2016 15:30:50 (UTC+8) - dc.date.issued (上傳時間) 29-Apr-2016 15:30:50 (UTC+8) - dc.identifier (Other Identifiers) B2002003821 en_US dc.identifier.uri (URI) http://nccur.lib.nccu.edu.tw/handle/140.119/88353 - dc.description (描述) 碩士 zh_TW dc.description (描述) 國立政治大學 zh_TW dc.description (描述) 統計學系 zh_TW dc.description (描述) 81354006 zh_TW dc.description.abstract (摘要) 管制圖設計的經濟模式在最近三十年已經被廣泛的研究。本研究利用更新 zh_TW dc.description.tableofcontents 壹 導論………………………………………………………………………………………………………………..1 一 研究動機與目的…………………………………………………………………..………………………3 (一) 研究動機……………………………………………………………………….…………………………3 (二) 研究目的……………………………………………………………………….…………………………4 二 研究方法………………………………………………………………………………………………………4 三 研究內容與架構…………………………………………………………………………………………..5 貳 文獻回顧與探討…………………………………………………….………………………………………7 參 二個非隨機因素製程模式之建立………………………………….…………………….………11 一 建立製程模式所需之假設……………………………………………………………….…………11 二 製程狀態的定義………………………………………………………..…………………….…………14 三 各個製程狀態發生之機率………………………………………………………….………………15 四 期望循環時間之推導…………………………………………………………………………………17 五 τ的定義與推導…………………………………………………………………………………………19 六 期望循環成本之推導…………………………………………………………………………………22 七 目標函數之推導……………………………………………………….…..……………………………25 肆 資料分析………………………………………………………………..….…………………………………27 一 直接搜尋法…………………………………………………………………………………………………27 二 最佳參數值之獲得…………………………………………………………….………………………32 三 S經濟管制圖與Shewhart S管制圖成本之比較…………………………………….…38 四 S經濟管制圖與Shewhart S管制圖對製程失控之偵測 能力比較…………………………………………………………………………………….………………41 伍 結論與建議……………………………………………………………………………………..……………54 陸 參考文獻………………………………………………………………………………………………………55 柒 附錄………………………………………………………………………………………………………………56 zh_TW dc.source.uri (資料來源) http://thesis.lib.nccu.edu.tw/record/#B2002003821 en_US dc.subject (關鍵詞) S 經濟管制圖 zh_TW dc.subject (關鍵詞) 非隨機因素 zh_TW dc.subject (關鍵詞) 更新理論 zh_TW dc.subject (關鍵詞) Economic S Control Chart en_US dc.subject (關鍵詞) Assignable Causes en_US dc.subject (關鍵詞) Renewal Theory en_US dc.title (題名) S管制圖之經濟設計:更新理論方法 zh_TW dc.title (題名) Economic Design of S Control Chart : A Renewal Theory Approach en_US dc.type (資料類型) thesis en_US dc.relation.reference (參考文獻) [1]Alt, F.(1981), “One Control Chart for the Mean and Variance”, Proceeding of Industrial Engineering Conference, Washington, D. C. pp143-145. [2]Banerjee, P. and Rahim, M. (1987), “ The Economic Design of Control Charts : A Renewal Theory Approach” , Engineering Optimization, Vol. 12, pp63-73. [3]Besterfield, D. (1979), Quality Control, Prentice-Hall, Englewood Cliffs, N. J. [4]Chung, K. and Chen, S. (1992), “ Joint Economically Optimal Design of X and S2 Control Charts”, Engineering Optimization, Vol. 19, pp101-113. [5]Collani, V. and Sheil, J. (1989), “An Approach to Controlling Process Variability”, Journal of Quality Technology, Vol. 21, no.2, April, pp87-96. [6]Duncan, A. (1956), “ The Economic Design of X chart Used to Maintain Current Control of a Process”, Journal of the American Statistical Association, Vol. 51, pp228-242. [7]Duncan, A. (1971), “The Economic Design of X Charts When There is a Multiplicity of Assignable Causes”, Journal of the American Statistical Association, Vol. 66, no.33, pp107-121. [8]Duncan, A. (1974), Quality Control and Industrial Statistics, Richard D. Irwin. Inc [9]Gitlow, H., Gitlow, S., Oppenheim ,A. and Oppenheim ,R.,(1989), Tools and Methods for the Improvement of Qualitv, Richard D. Irwin,Inc. [10]IMSL Library (1989) , User’s Manual Math/Library, Fortran Subroutines, IMSL, Inc. [11]Juran, J. (1979), Quality Control Handbook, McGraw-Hill, Inc. [12]Montgomery, D. (1980), “The Economic Design of Control Charts : A Review and Literature Survey”, Journal of Quality Technology, Vol.12,NO.2, April, pp75-86. [13]Moen, R., Nolan, T. ,and Provost, L.(1991), Improving Quality Through Planned Experimentation, McGraw-Hill,Inc. [14]Panagos, M. ,Russell, H. and Montgomery, D. (1985),” Economic Design of X Charts: For Two Manufacturing Models” , Naval Research LogisticsQuarterly, Vol. 32. pp631-646. [15]Rahim, M., Lashkari, R. and Banerjee, P. (1988).” Joint Economic Design of Mean and Variance Control Charts”, Engineering Optimization, 14, pp65-78. [16]Ross, S. (1989), Introduction to Probability Models, Academic Press. [17]Saniga, E. (1979), “Joint Economically Optimal Design of X and R Control Charts”, Management Science, Vol. 24, No.4, pp420-431. [18]Spanos, C. (1992), “Statistical Process Control in semiconductor Manufacturing”,Proceeding of IEEE, June. [19]Shewhart W. (1931), Economic Control of Quality of Manufactured Product, D. Van Nostrand Company, Inc. [20]Yang, S. (1993).”Economic Design of Joint X and R Control Charts : A Markov Chain Method”, JNCU, Vol. 66, No.2, pp445-494. zh_TW
